DCi 4|300DA

Four-channel, 300W @ 4Ω Power Amplifier with Dante™ / AES67 Networked Audio, and 70V/100V

DCi 4|300DA
Imagens Grandes

For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for superb efficiency and exemplary audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport.

Recommended for: Instalação.

Mais detalhes

  • Redundant, independent Dante / AES67 ports
  • Primary & Secondary
  • Will accept 48khz or 96khz
  • Capable of sending out Dante / AES67 audio from analog inputs pre/post processing (@ 48kHz)
    • Audio Architect Control and Monitoring
    • DriveCore Amplifier Technology
    • Universal PFC Power Supply
    • DSP
  • 48kHz processing
  • 20 Presets
  • Input router
    • High, medium, and low priority inputs
  • Input delay up to 2s
  • Input EQ
  • Crossover
  • Output EQ
  • Output Delay up to 100ms
  • LevelMAX limiter
  • Load Monitoring
    • Pilot tone
  • Normal
  • Burst
    • Continuous Load Monitoring
    • Sweep Load Monitoring
  • Channel Auto-Standby
  • Speaker Tunings
    • Aux-Port
  • Sleep contact closure
  • Amp Status output
    • Removable air filters
    • Front panel LED indicators
    • AES67 Compatible


  • Integrated Dante™ / AES67 Networked Audio – Simplifies installation by enabling Dante / AES67 networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers. Includes support for Dante 4.0 firmware for integration with Dante Domain Manager.
  • Network Configuration, Monitoring & Control – Better monitoring, control and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.
  • Programmable General Purpose Input/Output Port – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.
  • Digital Signal Processing – DSP capabilities include the following:
    • LevelMAX Limiters
    • Input/Output EQ
    • Crossover
    • Delay
    • Matrix Router
    • Speaker Line Monitoring





  Version Language Size Uploaded
platform icon HiQnet Audio Architect™
updated: 02 de Dezembro
    02 de Dezembro
Data Sheets
file type icon DriveCore Install DA (Dante) - Datasheet
en updated: 26 de Novembro
  en  1,15 MB 26 de Novembro
Owner's Manuals
file type icon DriveCore Install DA (Dante) - Manual (English)
en updated: 26 de Novembro
  en  6,6 MB 26 de Novembro
file type icon DriveCore Install DA (Dante) - Manual (Chinese)
zh updated: 26 de Novembro
  zh  6,59 MB 26 de Novembro
Comparison Charts
file type icon DriveCore Install product comparison chart
updated: 22 de Outubro
    268 KB 22 de Outubro
Declaration Of Conformities
file type icon DriveCore Install Family Declaration of Conformity
version B, updated: 23 de Novembro
  827 KB 23 de Novembro

If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.


Output Channels 4
Frequency Response (8Ω, 20Hz - 20kHz) ±0.25dB
Dante Input Signal to Noise Ratio >108dB
Total Harmonic Distortion (at full rated power, 20Hz - 20kHz) 0.35%
Voltage Gain 34dB
Damping Factor (20Hz to 100Hz) >1000
Input Impedance (nominal balanced, unbalanced) 10kΩ, 5kΩ
Maximum Input Level before Compression +20dBu
Load Impedance (Stereo/Dual Mode) 2Ω - 16Ω; 70Vrms and 100Vrms
Load Impedance Bridge Mono 4Ω - 16Ω; 140Vrms and 200Vrms
Cooling Continuously variable speed forced air, front to back airflow
Maximum Fan Noise (re dBA SPL @ 1M) 45
Required AC Mains (±10%) 100V-240V ~ 50/60Hz
Power Connector 15A IEC
Dimensões 19" x 3.5" x 14.25" (2U high)
48.3cm x 8.9cm x 35.63cm
Weight 20.1lbs (9.12kg)



DCi 4|300DA

Four-channel, 300W @ 4Ω Power Amplifier with Dante™ / AES67 Networked Audio, and 70V/100V