DCi 4|1250N

Amplificador de potência de quatro canais, 1250W @ 4Ω com ligação BLU, 70V / 100V

Imagens Grandes

The new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.

Get DCi Certified!

Network Power Matrix

Network Power Matrix Bridge

Recommended for: Instalação, Cinema, Gravação e Transmissão.

Mais detalhes

DCi Video 1       

DCi Video 2

 DCi Video 3

DCi Video 4

 DCi Video 5

DCi Video 6

DCi Video 7

DCi Video 8

DCi Video 9

DCi Video 10

 DCi Video 11

DCi Video 12

DCi Video 13

DCi Video 14

DCi Video 15

DCi Video 16

DCi Video 17

DCi Video 18

DCi Video 19

DCi Video 20







ANALOG & DIGITAL INPUTS – With digital audio transport via HARMAN’s proprietary BLU-Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.

NETWORK MONITORING & CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.

PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORTS – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.

DIGITAL SIGNAL PROCESSING – DSP capabilities include the following:

  • LevelMAX Limiters
  • Input/Output EQ
  • Delay
  • Matrix Mixer
  • Speaker Line Monitoring


  Version Language Size Uploaded
DCi 4|1250N Arquivos CAD
updated: 20 de Julho
    12 MB 20 de Julho
HARMAN Installed Sound Solutions Infographic
updated: 19 de Julho
    715 KB 19 de Julho
Operation Manual - Chinese
zh updated: 06 de Abril
  zh  3,6 MB 06 de Abril
Operation Manual - English
en updated: 09 de Outubro
  en  8,29 MB 09 de Outubro
DriveCore Install Series Brochure
updated: 22 de Outubro
    20,4 MB 22 de Outubro
HiQnet Audio Architect™
updated: 23 de Agosto
    23 de Agosto
Declaration Of Conformities
DriveCore Install Family Declaration of Conformity
updated: 27 de Agosto
    94 KB 27 de Agosto
Data Sheets
DriveCore Install Network Series Data Sheet
updated: 06 de Abril
    939 KB 06 de Abril
Comparison Charts
DriveCore Install product comparison chart
updated: 22 de Outubro
    268 KB 22 de Outubro
Application Guides
App Focus Dynamic BGM Systems
updated: 22 de Outubro
    2,95 MB 22 de Outubro
System Technology Bulletins
Tech Note - DCiN GPIO - VCA Configuration
updated: 22 de Outubro
    733 KB 22 de Outubro
STB DCiN - GPIO VCA Configuration #0001
updated: 22 de Outubro
    544 KB 22 de Outubro
STB DCiN - Y Input Configuration #0003
updated: 22 de Outubro
    643 KB 22 de Outubro
STB DCiN - High Z Configuration #0002
updated: 22 de Outubro
    819 KB 22 de Outubro

If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.


Frequency Response ( 8 Ohms, 20 Hz - 20 kHz) +/- 0.25 dB
BLU Link Input Signal to Noise Ratio (A-Weighted) > 104dB
Total Harmonic Distortion (at full rated power, 20 Hz - 20 kHz) 0.35%
Voltage Gain 34 dB
Damping Factor (20 Hz to 100 Hz) >1500
Input Impedance (nominal balanced, unbalanced) 10 kOhms, 5 kOhms
Maximum Input Level before Compression +20 dBu
Load Impedance (Stereo/Dual Mode) 2 - 16 Ohms; 70Vrms and 100Vrms
Load Impedance Bridge Mono 4 - 16 Ohms; 140Vrms and 200Vrms
Cooling Continuously variable speed forced air, front to back airflow
Maximum Fan Noise (re dBA SPL @ 1M) 47
Required AC Mains (+/- 10%) 100V-240V ~ 50/60 Hz
Dimensões 19" x 3.5" x 17" (48.3cm x 8.9cm x 42.5cm)
Weight 30lbs (13.60kg)
IEC Power Connector 20A



DCi 4|1250N

Amplificador de potência de quatro canais, 1250W @ 4Ω com ligação BLU, 70V / 100V