Certification Marks & Crown Test Standards

This document gives details on the meaning of several certification listing marks: UL, ETL, CE and FCC. It also tells which test standards have been applied to Crown products.

First, here are two overview paragraphs from CSA International's document, "Certification Consolidation Program".

"Standards writing and publishing is independent from specific product testing and certification functions. Standards are (usually) created by independent committees, who then publish their rulings with the assistance of standards organizations such as CSA, UL, ANSI, or IEE. Approved standards are then made available to manufacturers as well as testing and certification organizations to assist with design, testing, and certification."

"Once a product has been found compliant to a standard, the accredited testing laboratory authorizes the product to bear thatlaboratories' licensed mark. So, the approval mark on the product shows consumers, specifiers, and authorities which accredited testing service has certified the product, not which service published the standard."

Now, the meaning of each Certification Mark:

The UL Listing Mark

This is one of the most common UL Marks. If a product carries this Mark, Underwriters Laboratories found that samples of this product met UL's safety requirements. These requirements are primarily based on UL's own published Standards for Safety. This type of Mark is seen commonly on appliances and computer equipment, furnaces and heaters, fuses, electrical panelboards, smoke and carbon monoxide detectors, fire extinguishers and sprinkler systems, personal flotation devices like life jackets and life preservers, bullet resistant glass, and thousands of other products.

Crown Audio Inc. products listed under UL have been tested to: 
UL813 Commercial Audio Equipment: 1996 Seventh Edition.

Product testing can be verified through UL directories online at http://www.ul.com
(File No. E106377).

The ETL Listing Mark

The product with this mark on it has been certified by ITS. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized U.S product safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued performance.

Crown Audio Inc. products listed under ETL have been tested to:

  • UL813 Commercial Audio Equipment: 1996 Seventh Edition.
  • UL6500_2 Audio/Video and Musical Instrument Apparatus for Household, Commercial, and Similar General Use.

Product testing can be verified through ETL directories online at
http://www.etlsemko.com/ProdDir/index.htm.

 

The CE Mark

The European Commission describes the CE mark as a "passport" that allows manufacturers to circulate industrial products freely within the internal market of the EU. The CE mark certifies that the products have met EU health, safety and environmental requirements that ensure consumer and workplace safety. All manufacturers in the EU and abroad must affix the CE mark to those products covered by the "New Approach" directives in order to market their products in Europe. Once a product receives the CE mark, it can be marketed throughout the EU without undergoing further product modification.

Most products covered by New Approach Directives can be self-certified by the manufacturer and do not require the intervention of an EU-authorized independent testing/certifying company (notified body). To self-certify, the manufacturer must assess the conformity of the products to the applicable directives and standards. While the use of EU harmonized standards is voluntary in theory, in practice the use of European standards is the best way to meet the requirements of the CE mark directives. This is because the standards offer specific guidelines and tests to meet safety requirements, while the directives, general in nature, do not.

The manufacturer may affix the CE mark to their product following the preparation of a declaration of conformity, the certificate which shows the product conforms to the applicable requirements. They must maintain a technical file to prove conformity. The manufacturer or their authorized representative must be able to provide this certificate together with the technical file at any time, if requested by the appropriate member state authorities.

There is no specific form for the declaration of conformity, but specific information is required. The declaration must include the following:

(1) The manufacturer's name and address.
(2) The product.
(3) The CE mark directives that apply to the product, e.g. the machine directive 93/37/EC or the low voltage directive 73/23/EEC.
(4) The European standards used, e.g. EN 50081-2:1993 for the EMC directive or EN 60950:1991 for the low voltage requirement for information technology.
(5) The declaration must show the signature of a company official for purposes of the company assuming liability for the safety of its product in the European market. This European standards organization has set up the Electromagnetic Compatibility Directive. According to CE, The Directive basically states that products must not emit unwanted electromagnetic pollution (interference). Because there is a certain amount of electromagnetic pollution in the environment, the Directive also states that products must be immune to a reasonable amount of interference. The Directive itself gives no guidelines on the required level of emissions or immunity that is left to the standards that are used to demonstrate compliance with the Directive.

The EMC-directive (89/336/EEC) Electromagnetic Compatibility
Like all other directives, this is a new-approach directive, which means that only the main requirements (essential requirements) are required. The EMC-directive mentions two ways of showing compliance to the main requirements:

  • Manufacturers declaration (route acc. art. 10.1)
  • Type testing using the TCF (route acc. to art. 10.2)

The LVD-directive (73/26/EEC) Safety
Like all CE-related directives, this is a new-approach directive, which means that only the main requirements (essential requirements) are required. The LVD-directive describes how to show compliance to the main requirements.

Crown Audio Inc. products that are CE marked have been tested for compliance to:

EMC Standards:

EN 55103-1:1995 Electromagnetic Compatibility Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control Apparatus for Professional Use, Part 1: Emissions 
ANNEX A Magnetic Field Emissions-Annex A @ 1 meter
ANNEX B Inrush Current- 10 random measurements
ANNEX E Emissions from signal, control and d.c. ports .15 to 50 MHz
EN 61000-3-2:1995+A14: 2000 Limits for Harmonic Current Emissions (equipment input current <= 16A per phase)
EN 61000-3-3:1995 Limitation of Voltage Fluctuations and Flicker in Low-Voltage Supply Systems Rated Current <=16A
EN 55022:1992 + A1: 1995 & A2: 1997 Limits and Methods of Measurement of Radio Disturbance Characteristics of ITE: Radiated, Class B Limits; Conducted Class A
EN 55103-2:1996 Electromagnetic Compatibility Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control Apparatus for Professional Use, Part 2: Immunity 
EN 61000-4-2:1995 Electrostatic Discharge Immunity (Environment E2-Criteria B, 4k V Contact, 8kV Air Discharge)
EN 61000-4-3:1996 Radiated, Radio-Frequency, Electromagnetic Immunity (Environment E2, criteria A)
EN 61000-4-4:1995 Electrical Fast Transient/Burst Immunity (Criteria B)
EN 61000-4-5:1995 Surge Immunity (Criteria B) 
EN 61000-4-6:1996 Immunity to Conducted Disturbances Induced by Radio-Frequency Fields (Criteria A)
EN 61000-4-11:1994 Voltage Dips, Short Interruptions and Voltage Variation

Safety Standard:

EN 60065: 1998 Safety Requirements Audio Video and Similar Electronic Apparatus

 

The FCC Mark

The Federal Communications Commission (FCC) is an independent United States government agency that is directly responsible to Congress. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions.

All devices that operate at a clock rate of 9 kHz are required to test their product to the appropriate FCC Code.

Crown Audio Inc. verifies through testing that our products meet the requirement of the Federal Communications Commission (FCC).

Title 47--Telecommunication

CHAPTER I Federal Communiations Commission
PART 15 Radio Frequency Devices