DriveCore Install Network Series

Categories:

$0.00

Product Overview

The new DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.

Test your knowledge and get DCi Certified!

You may also be interested in the following product(s)

DriveCore Install Network Display Series

DriveCore Install Network Display Series

ComTech DriveCore Series

ComTech DriveCore Series

DriveCore Install Analog Series

DriveCore Install Analog Series

 

 

Product Details

DriveCore

A culmination of nearly two decades of R&D in PWM and switch-mode amplification, DriveCore is a Crown exclusive that combines hundreds of parts into one chip the size of a your fingertip, resulting in more efficiencies and unsurpassed reliability.  Learn more about DriveCore technology here: http://www.crownaudio.com/usa/drivecore.htm.

Analog & Digital Inputs

With digital audio transport via HARMAN’s proprietary BLU-Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.

Network Monitoring & Control

Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.

Programmable General Purpose Input/Output Ports

GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.

Digital Signal Processing

DSP capabilities include the following: LevelMAX Limiters, Input/Output EQ, Delay, Matrix Mixer, and Speaker Line Monitoring

Warranty

Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

Specifications

  DUAL (all channels driven) DUAL BRIDGED (all channels driven) BRIDGED
Models 2ohm 4ohm 8ohm 16ohm 70Vrms 100Vrms 4ohm 8ohm 16ohm 140Vrms 200Vrms
2|300N 150W 300W 300W 150W 300W 300W 300W 600W 600W 600W 600W
2|600N 300W 600W 600W 300W 600W 600W 600W 1200W 1200W 1200W 1200W
4|300N 150W 300W 300W 150W 300W 300W 300W 600W 600W 600W 600W
4|600N 300W 600W 600W 300W 600W 600W 600W 1200W 1200W 1200W 1200W
8|300N 150W 300W 300W 150W 300W 300W 300W 600W 600W 600W 600W
8|600N 300W 600W 600W 300W 600W 600W 600W 1200W 1200W 1200W 1200W
2|1250N 1250W 1250W 1250W 625W 1250W 1250W  2500W  2500W  2500W  2500W  2500W
4|1250N 1250W 1250W 1250W 625W 1250W 1250W  2500W  2500W  2500W  2500W  2500W

 

Performance Specifications 2|300N 4|300N 8|300N 2|600N 4|600N 8|600N 2|1250N 4|1250N
Frequency Response (8 Ohms, 20 Hz - 20kHz) ±0.25 dB
BLU Link Signal-to-Noise Ratio (ref. rated power, 8Ohms, 20 Hz - 20 kHz) >108 dB
Analog Input Signal to Noise Ratio (ref. rated Power, 8Ohm, 20 Hz - 20kHz >104 dB
Total Harmonic Distortion (at full rated power, 20Hz - 20kHz) 0.35%
Voltage Gain (at Maximum Level Setting) 34 dB
Damping Factor (20 Hz to 100 Hz) >1000 >1000 >1000 >1000 >1000 >1000 >1500 >1500
Input Impedance (nominal balanced, unbalanced) 10 kOhms, 5 kOhms
Maximum Input Level before Compression (Low Gain Mode) +20dBu
Load Impedance Stereo/Dual Mode 2 - 16 Ohms; 70Vrms and 100Vrms
Load Impedance Bridge Mono 4 - 16 Ohms; 140Vrms and 200Vrms
Cooling Continuously variable speed forced air, front to back airflow
Maximum Fan Noise (re dBA SPL @ 1M) 45 45 47 45 45 47 47 47
Required AC Mains (±10%) 100V - 240V ~50/60Hz
IEC Power Connector 15A IEC 15A IEC 15A IEC 15A IEC 15A IEC 20A IEC 15A IEC 20A IEC
Physical Specification 2|300N 4|300N 8|300N 2|600N 4|600N 8|600N 2|1250N 4|1250N
Width 19 in. (48.3cm)
Height 3.5 in. (8.75cm)
Depth 14.25 in (36.cm) 14.25 in (36.cm) 14.25 in (36.cm) 14.25 in (36.cm) 14.25 in (36.cm) 17 in (43.2 cm) 14.25 in (36.cm) 17 in (43.2 cm)
Weight 18.8 lbs (8.53kg) 20.1 lbs (9.12kg) 23.5 lbs (10.66kg) 18.8 lbs (8.53kg) 20.1 lbs (9.12kg) 30 lbs (13.6kg) 23.5 lbs (10.66kg) 30 lbs (13.60kg)

 

SOCIAL MEDIA
 

Share your videos or photos of your DriveCore Install amps in action! 

Crown YouTube Channel        Crown on Facebook



Stay up to date with Crown's firmware and software releases.