crystal sound

IT4000 problems with fan noise

Recommended Posts

Hello everybody,

we´re using 10pcs of IT4000 here in Germany (230V/50Hz).

All of them (and also all other IT-Amps we know from other rental companys)

are producing a high level of fan noise.

At first it´s a constant noise like a hum, after a few minutes it starts howling.

Absoluty anusable for small locations or vocals reinforcement.

No we tried (just for fun) at 110V Transformer and it´s that quiet you´re expect it from an amplifier like that. :blink:

I don´t think that this phenomen is acceptable for an amplifier ist this range (of quality and price).

Do you have a solution for us? Except the permanent use of dozens of 110 transformers <_<

Greets

Alex

Crystal Sound

Share this post


Link to post
Share on other sites
DGlass    0

Since you are in Germany and it will hard for us to get a look at your amplifiers I am going to recommend that you get at least one of the amps to "Audio Pro" the distributor there in Germany and have their Techs look the situation over and see what they say. We currently haven't heard of this situation.

Share this post


Link to post
Share on other sites
Hello everybody,

we´re using 10pcs of IT4000 here in Germany (230V/50Hz).

All of them (and also all other IT-Amps we know from other rental companys)

are producing a high level of fan noise.

At first it´s a constant noise like a hum, after a few minutes it starts howling.

Absoluty anusable for small locations or vocals reinforcement.

No we tried (just for fun) at 110V Transformer and it´s that quiet you´re expect it from an amplifier like that. :blink:

I don´t think that this phenomen is acceptable for an amplifier ist this range (of quality and price).

Do you have a solution for us? Except the permanent use of dozens of 110 transformers <_<

Greets

Alex

Crystal Sound

2398[/snapback]

:)

Share this post


Link to post
Share on other sites

Hello there in Germany and America,

We use about 30 amps now (I-Techs 4000 and 8000's) and have had this problem with several 4000's. After contacting with our distributor we received some new amps and later new input boards for this amps. Then the problem was solved. We use the amps also in theatrical and corporate events and can't have the noise.

At Crown they know the problem.

Best regards,

Sander Krouwel

Road Produkties Audiovisueel

info@roadprodukties.nl

Holland

Share this post


Link to post
Share on other sites
DGlass    0
Hello there in Germany and America,

We use about 30 amps now (I-Techs 4000 and 8000's) and have had this problem with several 4000's. After contacting with our distributor we received some new amps and later new input boards for this amps. Then the problem was solved. We use the amps also in theatrical and corporate events and can't have the noise.

At Crown they know the problem.

Best regards,

Sander Krouwel

Road Produkties Audiovisueel

info@roadprodukties.nl

Holland

2493[/snapback]

Your issue was unrelated and had to do with the input/USP-3T board module and firmware not with line voltage.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now