Recommended Posts

on7tim7    0
:( We have a network of 18 smx-6 units for a few years now, and we are very happy with it. When ever we have to replace a unit it is very difficult to find a new one. We decide to purchase USM810 mixers to replace, little by little, each smx-6 that may need replaced. I am trying to configured the first 810 in my computer and after I connected it via RS232 the loop is checked but the unit is not found. I am familiar with the old msx-6 units but not with this model. Could some one tell me what I am doing wrong, or what I am missing?. Thanks in advance.

Share this post


Link to post
Share on other sites
DGlass    0

Well..... Lets start with a few questions.

What version of the software are you using? You will need IQ for Windows 5.12

Are you using a Modem or a Null-Modem cable? We require the use of a Modem (straight through cable).

Do you have the SMX-6 units hooked up to The USM-810, via the IQ loop, or is it being setup stand-alone?

What exactly does the Discovery Window say when you try to run a Roll Call?

Do you have any TSR programs trying to use the serial port at the same time you are trying to run a roll? This would be like PDA software assigned to sink to the serial port of the computer or even our own IQ Net Server program if it is running. Look for these in the systems try in the lower Right of your Desktop next to the clock. These TSRs will not let anything else get to the serial port as they continually are looking at it.

Share this post


Link to post
Share on other sites
on7tim7    0
:( First, yes I am using 5.12 software. Second, I have only one 810 unit (stand-alone) connected to the PC with a RS323 cable. As a matter of fact, the unit is found when I run the 4.12 client software version instead the 5.12 version. This will give you a better idea of what is happening.

Share this post


Link to post
Share on other sites
DGlass    0

The more information I have the better I am able to serve you. If you could call me here at Crown I will be glad to walk through the issue and try to resolve it faster than we can in this forum.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.