Carbon

Stereo or Mono ?

Recommended Posts

Carbon    0

Hi, new to the site so apologies if this is a dumb question.

I'm a keyboard player. Inspired by the great Jon Lord using Crown DC power amps through Marshall bass cabinets I've started looking at the XLS Drivecore series of amps for my Keyboards. I'm attracted by the fact that rehearsal studios offer a backline, but normally only 4 * 12 Marshall cabs, and I could come along with a light-weight but powerful and neutral sounding power amp. The newer generation speaker cabs are wired for stereo but the old Marshall speaker cabs are mono - one TS jack plug only.

I've read the XLS manual but it doesn't seem to cater for supplying a stereo source (keyboard mixer desk front of house) into the Amp and then out to a mono wired speaker cabinet.

Anyone have any thoughts on how to wire up from stereo keyboard amp to mono speaker cab via the XLS.

I appreciatge that the manual shows running a Mono line from the keyboards to the XLS but I don't have mono out on all my keys. Can the XLS be configured to cope with a stereo source and then drive either stereo or mono cabinet?

Share this post


Link to post
Share on other sites
Carbon    0
What kind of speaker? Do you already have the amp?

I don't have the amp yet; still working if its worth me buying it.

Regarding the speaker - all depends on which rehearsal studio I am in. I'm trying to be able to hook the amp into a 4*12 cab that is already there. Some have one input some have two for stereo - hence trying to work out how to connect the amp given I only have stereo outputs from my keyboards.

Share this post


Link to post
Share on other sites
dakos    0
What kind of speaker? Do you already have the amp?

I don't have the amp yet; still working if its worth me buying it.

Regarding the speaker - all depends on which rehearsal studio I am in. I'm trying to be able to hook the amp into a 4*12 cab that is already there. Some have one input some have two for stereo - hence trying to work out how to connect the amp given I only have stereo outputs from my keyboards.

The feature you need is "signal summing" of the left and right channels, the XLS series doesn't have that but the XTI doe's, it's done automatically when you configure it's DSP to work in bridge mode.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now