Sign in to follow this  
lambroffs

"!" on Attenuation Screen

Recommended Posts

lambroffs    0

I have a stack of three I-Tech 8000 amps running firmware 1.301. With no applied signal and no apparent fault conditions, one of the amps shows an exclamation mark right below the "dB" letters on the Attenuation Screen. Cycling power does not clear the "!". I cannot find reference to the symbol in either the User's Manual or the Application Guide. What is this amp trying to tell me? It appears to operate correctly otherwise.

Share this post


Link to post
Share on other sites
KGring    0

The ! indicates that the error reporting detected errors at some time on the amp. These errors will remain stored in the amp until removed.This is new in the 3.01 firmware to visually let you know the amplifier has logged these errors. This can be removed by clearing the errors from the front panel menu. There is a small bug, the clear function for thermal error and for clip errors are revered. You clear clip errors from the thermal screen, and you clear clip errors from the thermal screen. This is being fixed in the firmware.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this