Sign in to follow this  
dj ARTZY

mrx-515 kai Sub

Recommended Posts

dj ARTZY    0

?????????, ??? ???? ?????? ???????? ???-2000. ??? ??????????? 2 ?R?-515 ??? ???? ?? ???? ???? 2 SUB ?R?-518S.... ????? ?? ?? ???? ?? ??? ???? ?????????? ??? ??? ????? ?? ?? ???? ?? 2 MRX-515 ??? 1 SUB MRX-518S? ????? ????????? ?? ???? ??? DSP ??? ?? ??? ???? ??? SUB !!

????????? ??? ??????

Share this post


Link to post
Share on other sites
Kevin Heber    0

Hi, the XTI2000 does not have enough power for both pairs of speakers, or for 3 speakers. However, if you want to try it anyway, you could put both 518S on channel one, and put both 515 on channel 2. Then set the crossover to 80Hz. Just make sure the amplifier does not clip. It would be best to have two amps for the four speakers.

???? ???, ?? XTI2000 ??? ???? ?????? ???? ??? ?? ??? ????? ??????, ? ??? 3 ?????. ??????, ??? ?????? ?? ?? ?????????? ???? ??? ??????, ?? ???????? ?? ????? ???? 518S ??? ?????? ???, ??? ?? ????? ??? ??? 515 ??? ?????? 2. ???? ??? ?? crossover ?? 80Hz. ???? ??????????? ??? ? ????????? ??? clip. ?? ???? ???????? ?? ?????? ??? ???????? ????????? ??? ?? ??????? ?????.

Share this post


Link to post
Share on other sites
dj ARTZY    0
Hi, the XTI2000 does not have enough power for both pairs of speakers, or for 3 speakers. However, if you want to try it anyway, you could put both 518S on channel one, and put both 515 on channel 2. Then set the crossover to 80Hz. Just make sure the amplifier does not clip. It would be best to have two amps for the four speakers.

???? ???, ?? XTI2000 ??? ???? ?????? ???? ??? ?? ??? ????? ??????, ? ??? 3 ?????. ??????, ??? ?????? ?? ?? ?????????? ???? ??? ??????, ?? ???????? ?? ????? ???? 518S ??? ?????? ???, ??? ?? ????? ??? ??? 515 ??? ?????? 2. ???? ??? ?? crossover ?? 80Hz. ???? ??????????? ??? ? ????????? ??? clip. ?? ???? ???????? ?? ?????? ??? ???????? ????????? ??? ?? ??????? ?????.

?? ???? 1 XTI-2000 ???????? ? XLS-2500???? ?? SUB'S?? ? ?? ????????????? ?? 1 XTI-4000 ??? ?? 2 MRX-518S & 2 MRX-515?? ??? 2 MRX-518S ????? ????????? ? XTI-2000 ? ? XLS-2500?? ????????? ???? !!

Share this post


Link to post
Share on other sites
Kevin Heber    0

The XTi2000 is good for running the two 518S in stereo, but not the two 515 in stereo. If you want to add another amp, the cheapest solution would be to add two XLS1000, one for each 515, running in bridge-mono. Another solution would be to add a XTi4000 to run both 515 in stereo.

? XTi2000 ????? ???? ??? ?? ?????????? ??? ??? 518S ?? stereo, ???? ??? ?? ??? 515 ?? ????????????. ?? ?????? ?? ?????????? ??? ???? ????????, ? ????????? ???? ?? ???? ?? ????????? ??? XLS1000, ??? ??? ???? 515, ?????? ?? ??????-mono. ??? ???? ???? ?? ???? ?? ?????????? ??? XTi4000 ?? ?????? ???? 515 ?? ????????????.

Share this post


Link to post
Share on other sites
dj ARTZY    0
The XTi2000 is good for running the two 518S in stereo, but not the two 515 in stereo. If you want to add another amp, the cheapest solution would be to add two XLS1000, one for each 515, running in bridge-mono. Another solution would be to add a XTi4000 to run both 515 in stereo.

? XTi2000 ????? ???? ??? ?? ?????????? ??? ??? 518S ?? stereo, ???? ??? ?? ??? 515 ?? ????????????. ?? ?????? ?? ?????????? ??? ???? ????????, ? ????????? ???? ?? ???? ?? ????????? ??? XLS1000, ??? ??? ???? 515, ?????? ?? ??????-mono. ??? ???? ???? ?? ???? ?? ?????????? ??? XTi4000 ?? ?????? ???? 515 ?? ????????????.

?????? ? XTI-2000 ??? ??? ??? ?? 2 MRX-515 ??? ????? ?????? ?? ??? ???? 1 ???-4000 ??? ?? ??? 2 MRX-515 ??? 2 MRX-518? ?? ??????? ????? ????? ??? ? ???-4000??

???? ?????????? ?? ???? ??? DSP ??? ???-4000??

????????? ???? ??? ??? ????? ???????????

Share this post


Link to post
Share on other sites
Kevin Heber    0

Use both the XTi2000 and XTi4000 for your 4 MRX speakers, if you just want two amps. Otherwise use the XTi2000 and two XLS1000's.

You can download and install System Architect to use JBL presets for the XTi amplifiers -- www.hiqnet.harmanpro.com

When you install the software, the presets will be in the \My Documents\Harman Pro\ folder.

?????????????? ??? ?? ??? ?? XTi2000 ??? XTi4000 ??? 4 MRX ????? ???, ??? ?????? ???? ??? ?????????. ???????????, ?????????????? ?? XTi2000 ??? ??? XLS1000 ???.

???????? ?? ?????????? ??? ?? ????????????? ???????????? ??? ?????????? ??? ?? ??????????????? ??????????? JBL ??? ?????? ????????? - www.hiqnet.harmanpro.com

???? ??? ??????????? ??? ??????????, ??? ??????????????? ????????? ?? ????? ??? \ My Documents \ Harman Pro \ ??????.

Share this post


Link to post
Share on other sites
dj ARTZY    0
Use both the XTi2000 and XTi4000 for your 4 MRX speakers, if you just want two amps. Otherwise use the XTi2000 and two XLS1000's.

You can download and install System Architect to use JBL presets for the XTi amplifiers -- www.hiqnet.harmanpro.com

When you install the software, the presets will be in the \My Documents\Harman Pro\ folder.

?????????????? ??? ?? ??? ?? XTi2000 ??? XTi4000 ??? 4 MRX ????? ???, ??? ?????? ???? ??? ?????????. ???????????, ?????????????? ?? XTi2000 ??? ??? XLS1000 ???.

???????? ?? ?????????? ??? ?? ????????????? ???????????? ??? ?????????? ??? ?? ??????????????? ??????????? JBL ??? ?????? ????????? - www.hiqnet.harmanpro.com

???? ??? ??????????? ??? ??????????, ??? ??????????????? ????????? ?? ????? ??? \ My Documents \ Harman Pro \ ??????.

O XTI-2000 ?? ???????? ??? 4 MRX-515 ???????

????????? ??? ??? ???????????

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this