Recommended Posts

Teddy3725    0

I recently purchased a CM311A and I'm experiencing distortion occasionally. I tested it with a pro-tools digi003 unit and it was fine. On the job however I get distortion unrelated to the pop filter as it happens pre-moisture. I use a Mackie 800 power head or a Phonic 600 and it seems to happen with both heads. I'm thinking something with the phantom power as both heads are phantom powered, but it's just a hunch. I'm a piano/vocalist, solo or small group, no loud screams unless I fall off the bench. Any ideas? Thanks

Share this post


Link to post
Share on other sites
MChapman    0

Here is a quick idea: put a 9V battery in the unit and turn on the battery switch and test it. If the distortion goes away, I would lean toward a phantom power problem. If it still has the same problem, then it it something in the microphone.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now