Sign in to follow this  
jimirosa

Wierd problem with system architech/IT6000

Recommended Posts

jimirosa    0

Since the very beginning, where I startet using Crown I-Tech amps, i have had a wierd problem with my system architect. When attemting to make a lowpass/hi pass on 48 db/oct the program does not respond (simply displays the filters as bypassed). If I attemt to set the hi/lo pass to 36 db/oct, everything works perfect.

What kan cause this problem?

I updatet to the latest software on both amps (both updates) and system architect i August 2006

Share this post


Link to post
Share on other sites
halllc87    0

If your update was from a firmware older then 2.0 then that is the source of your problem. The only way to fix that, I have been told after having the same problem in the past, is to completely reconfigure all of your settings manually. So write down all of your settings

Since the very beginning, where I startet using Crown I-Tech amps, i have had a wierd problem with my system architect. When attemting to make a lowpass/hi pass on 48 db/oct the program does not respond (simply displays the filters as bypassed). If I attemt to set the hi/lo pass to 36 db/oct, everything works perfect.

What kan cause this problem?

I updatet to the latest software on both amps (both updates) and system architect i August 2006

5308[/snapback]

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this