mallia_audio

Members
  • Content count

    18
  • Joined

  • Last visited

Community Reputation

0 Neutral

About mallia_audio

Contact Methods

  • ICQ
    0
  1. I receive this message when I double click on the EQ or X-over of the XTi control
  2. xti display - not there when cold

    ermmmm XTI Not for road use
  3. XTI 4000 Problems

    If you have to tap on the volume control then it is a faulty potentiometer?
  4. XTI 4000 Problems

    So you are saying that all my rack is faulty? that is 5 amps. I had to be unlucky will all 5? They all have a unique individual problem. Real amps with character. 1.5% percent return rate? Highly unbelievable. How about rate of failures and problems? I heard a company who bought 12 of the 2000 and 4000, they all had an issue. But the company managed to modify them in some way to avoid other possible failures.
  5. Crown XTi 2000 Signal Problem

    Yes because they are toys. Cheaply made. Even the chassis. Notice how the handles bend when you push them slightly. Has anyone opened the inside? To me and and to my friend who is an electrical engineer first impressions were: looks like a cheap car audio amplifier. Horrible. You can see how much their prices have dropped. looks even worse than the xti 2000. The 2000 has a rubber pad on top of the heatsink so when the top cover is on it feels solid, to give you an impression they are solid.
  6. Crown XTi 2000 Signal Problem

    Yes because they are toys. Cheaply made. Even the chassis. Notice how the handles bend when you push them slightly. Has anyone opened the inside? To me and and to my friend who is an electrical engineer first impressions were: looks like a cheap car audio amplifier. Horrible. You can see how much their prices have dropped.
  7. XTi2000 Signal Problem

    Have you had issues with the volume knobs? like when u press them or tap them they start to leak?
  8. XTI 4000 Problems

    Try doing this; play some music through the channel and gently tap on the volume control and increasing on pressure. You will start hearing crackling and then suddenly the volume will come back, it worked on mine. Thats when the leaking problem happens. i have this on 3 of my amps. These amps are toys.
  9. Leaking outputs

    My 3 XTi 2000's leak ALOT of output when the Volume knobs are turned down to zero, I barely use these amps, Why is this? Update: When i tap on the volume knob of the leaking channel it seems to go away. I turn the knob up and down again, leaking persists after a few turns of the knob. Why do I have to tap them in the first place? :/
  10. XTi2000 Signal Problem

    I've just turned on one of my 3 XTi amps that I have not used in a long time and seem to be having a problem with it; The signal light comes on, on the right channel without giving it any signal. It is simply plugged in and not being fed anything. On system architect it is showing the problem too. I have not yet tried sending a signal to that channel and connecting a speaker to it fearing of blowing any drivers.
  11. I've just turned on one of my 3 XTi amps that I have not used in a long time and seem to be having a problem with it; The signal light comes on, on the right channel without giving it any signal. It is simply plugged in and not being fed anything. On system architect it is showing the problem too. I have not yet tried sending a signal to that channel and connecting a speaker to it fearing of blowing any drivers.
  12. Blue screen + Buzzing

    i'll just return it and get a new one. no probs
  13. Blue screen + Buzzing

    I've owned this model for 4 months now. Used only two times. After a few minutes of using it I turn it off and decide to turn it back on later. Same problem. Blank LCD screen, no LEDS and internal buzzing. I turn it off and try again after leaving it disconnected for about 10-15 minutes. Turns back on normally. My freind just ordered 2 of them. I hope he doesnt have any simillar probs. Very disappointed.
  14. XTi Models

    Hello everyone. Are these amplifers switch mode technology? thanks in advance
  15. Blue screen + Buzzing

    After leaving the amp for the night, i tried turning it on again. It came back on normally.