Thomas R. Cox

  • Content count

  • Joined

  • Last visited

Community Reputation

0 Neutral

About Thomas R. Cox

Contact Methods

  • Website URL
  • ICQ
  1. ITECH and SA 1.30

    Hi Brad, No firewall, no LA. I stress that, IQ works flawlessly under all iterations of adapter settings we have tried. It seems that SA is just not opening our laptop interface. ???? Why is IQ working and SA not ? Of course, we can take the SA tunings and use IQ to manually build them as data frames. That's just a pain. Besides, we like the SA GUI and want it to work. Does SA need a particular service running that IQ does not ? A protocol other than tcp/ip ? Tom and Johnny B
  2. ITECH and SA 1.30

    Hi David, We've been busy with shows last couple of days. Got time yesterday to follow your instructions. So we.. *Talked to our router/switch and turned off DHCP. *Set the IP static on the laptop NIC to Subnet *After removing all adapters and adding we got.. "Error opening the following ethernet interface:" Note: The static IP's of the amps are thru Subnet *Tried re-setting the laptop NIC to removed adapters again in SA. Added we got.."Error opening the following ethernet interface:" *We then used TCPIQ utility to set one rack to thru 113. Re-set the laptop NIC to checked communication with IQ..good. *Back to SA removed adapters added we got.."Error opening the following ethernet interface:" Is SA not binding? IQ never seems to have a problem "seeing the adapters" We have yet to get SA to. Tom and Johnny B. AVT Hyatt Chicago
  3. We have portable racks w/2 4000's and 1 8000 ITechs in each. We've been operating passive VRX 965's for a year and wanted to have the ability to go active. Soo.. we downloaded what looks like a great set of tunings from JBL, done in SA. Upgraded the firmware to and installed SA 1.30 and IQ 8.0.1a. IQ works like a charm, finds the amps...yada yada. SA on the other hand...keeps giving us one error "Error opening interface Adapter which is the IP assigned by DHCP of our NetGear switch. The amps are static at thru Everyone is happily on the same subnet. We've even tried changing all the IP's to static 169.XXX.XXX's no go. We've removed all adapters added new adapter, no go. Reinstalled SA, no go. SA can't seem to open our ethernet adapter. There is something stupid and silly that we're missing here. ??? Any and all help most gratefully appreciated. Thomas Cox and Johnny B AVT,Inc
  4. it-4000 & vrx 932

    Art, Here at AVT Chicago we use our 932's in passive for the most part. We did the same thing that MichaelsAudio did for that condition. Bi-Amped, howerver, the tunings from JBL for the BSS 366 sounded somewhat nicer to us, with no fudging at all. Just a matter of taste and of course venue. Our systems never leave the hotels. Best to ya Tom