Crown T3

Larger Images

The Crown T series are professional-grade power amplifiers designed for entertainment venues, movie theaters, mobile performances, conference rooms and other commercial venues. Their compact design makes them perfectly suited for mobile use and entertainment venues with limited space.

The four T series amplifier models (T3, T5, T7 and T10) are based on professional Crown technologies, with a simple and efficient amplification circuit, and an upgraded heat dissipation system designed to ensure professional performance day after day. For over 60 years Crown has focused on power amplifier technology research and innovation, and with the T series, Crown delivers a user-friendly installation with professional audio quality.

Minimum guaranteed power	T3	T5	T7	T10
1 kHz, 0.5% THD
Stereo, 4Ω per channel	450W	750W	950W	1350W
Stereo, 8Ω per channel	330W	500W	675W	1000W
Bridged mono, 8Ω	900W	1500W	2000W	2700W

Downloads

	Version	Language	Size	Uploaded
Data Sheets
T Series Datasheet updated: Nov 2018			5.77 MB	Nov 2018
Owner's Manuals
T Series Manual updated: Jul 2020			3.93 MB	Jul 2020
T Series Manual updated: Nov 2018			4.94 MB	Nov 2018
Spec Sheets
T Series Spec Sheet updated: Oct 2020			329 KB	Oct 2020

If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.

Specifications

Frequency Response	20Hz - 20kHz, +0/-1dB
Total Harmonic Distortion (THD)	< 0.5%, 20 Hz - 20kHz
Intermodulation Distortion	= / < 0.35% (from full rated output to -30dB)
Conversion Rate	>10V/us
Voltage Gain	31dB
Damping Factor	> 200 (8Ω, 10 Hz - 400 Hz)
Signal to Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted)	> 100 dB
Crosstalk	-75dB at 1kHz, -59dB at 20kHz
Input Sensitivity	0.775V or 1.4V (rated power 8Ω)
Input Impedance	20kΩ Balanced, 10kΩ Unbalanced
Input Connectors	Balanced XLR and one unbalanced RCA per channel
Output Connectors	4-POLE Speakon® and a pair of binding posts per channel
Front Panel Components	Power switch, channel gain control
Rear Panel Components	Output mode switch: stereo, parallel, bridge, Input sensitivity switch: 0.775V or 1.4V
Power Indicator	Blue and green two-color LED
Signal Indicator	One green LED per channel
Clip Indicator	One yellow LED per channel
Fault Indicator	Red LED per channel , indicating that the channel is closed
Power cables	Plug : 10A, 250V, Wire : CCC 3x1.5mm 2
Protection	Protection against short circuit, no load, on / off noise, radio interference protection circuit
Ventilation	Air convection mechanism
Cooling	Internal air is forced to dissipate heat, fan cooling, rapid adjustment, temperature protection
Dimensions (w x h x d)	19” x 3.46” x 12.45” (482 mm x 88 mm x 316.4 mm)
Net Weight	28.0 lb (12.7 kg)
Shipping Weight	32.4 lb (14.7 kg)