PIP-USP4 Module

Categories: Network Products, Amp Accessories, Installed Sound
$0.00

Product Overview

The Crown PIP-USP4 is a 4th generation DSP-based PIP (Programmable Input Processor) input module for CTs Series two channel amplifiers. The USP4 connects to an Ethernet network allowing it to be remotely controlled and monitored via System Architect. In addition, the USP4 allows the transport of real-time digital audio via CobraNet™ or AES. Offering crisp clear sound and the widest dynamic range possible, the PIP-USP4 provides unprecedented power and flexibility in one compact – and very affordable – module.The USP4 can be installed in any CTs two channel amplifier.

You may also be interested in the following product(s)

CTs Series

CTs Series

     

 

Product Details

Digital Signal Processing

Ultra smooth processing by onboard high-definition BSS OmnidriveHD™ DSP with 24-bit,192 kHz Analog Devices SHARC A/D and D/A converters and true 96 kHz processing.

Filters, Limiters, Controls

The USP4's OmnidriveHD processor gives the user an enormous amount of digital signal processing. LevelMAX™ limiters, proprietary FIR and IIR filters, audio routing, faders, meters, polarity & mute, compressors, delays, error reporting and load monitoring are all available. Built in noise and sine-wave generators provide noise masking and test capabilities. The enhanced AUX port allows users to interface with the USP4 to provide additional external control and monitoring.

HiQnet™

The USP4 is a HiQnet™ series component and connects to the audio control/monitor network using 100Mb* Ethernet hardware (switches, Network Interface Cards, and cables). The audio signal is available over the same 100MB Ethernet network, providing a simple to install, single plug solution for audio distribution, control, and monitoring.

The USP4 requires HiQnet Software

Inputs

Multiple Input Options include Analog, CobraNet™, and AES3 Digital Audio.

Warranty

Three Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

(Effective May 1, 2011 when installed into a CTs Series amplifier the warranty is extended to five years.)



Stay up to date with Crown's firmware and software releases.