Systems Technologies Notes
This page contains a list of links to notes on various aspects of IQ and System Architect products.
Further information may also be found on the Crown Knowledge Base or the Crown Forums.
All files on this page are in PDF format.
| Product(s) | Software | Discription | System Technologies Note: |
| All Legacy Current Loop devices | IQ for Windows IQNET | An IQwin Client computer cannot communicate with an IQNET Server Computer | STN001rev1 |
| PIP USP-2 & USP-2CN with CTs Amplifiers | IQ for Windows | Thermal Meters for the USP-2/USP-2CN read high when installed in a CTs series amplifier. | STN002 |
| PIP USP-2 CTS4200 & CTs8100 | IQ for Windows | Creating Listen Bus buttons on a Custom Control Screen | STN003 rev1 |
| USM 810 |
IQ for Windows |
Presets cannot be recalled for a USM-810 using a Trigger or a Hot Apot on a Custom Control Page. Presets cannot be recalled from a third party controller using a Serial command String. | STN004 |
| All TCP/IQ Ethernet Devices | TCP IQ Utility IQwic |
How to get started using TCP/IQ components. | STN005 |
| USM-810 | IQ for Windows | USM-810 Input Gate-Ducking Setup | STN006a |
| PS-8810 PS-8810C | IQ for Windows IQwic |
PS-8810 Input Gate-Ducking Setup | STN006b |
| PS-8810 (non-Cobra-Net) | IQ for Windows | IQ for Windows software continually opens an update panel locking out the software from being used. | STN007 |
| PS-8810 (non-Cobra-Net) | IQ for Windows | PS-8810 randomly goes OFF and ON line by its self. Random loss of RS-232 communications with PS-8810. |
STN008 |
| All TCP/IQ Ethernet Devices | IQwic | IQwic software cannot find products from a different network via a router. | STN009 |
| All Legacy Current Loop devices | IQ for Windows | Computer doesn't have an RS-232 Port. Communications to a Legacy IQ 20ma Current Loop system with a computer that doesn't have an RS-232 serial Comm. Port. | STN010 |
| PIP USP-2 & USP-2CN with CTs Amplifiers | IQ for Windows | USP-2 modules with firmware v.1.00x and USP-2CN modules with firmware v.200x cause erratic software monitoring. Related to TN002 | STN011 |
| All TCP/IQ Ethernet Devices | IQwic | After performing firmware updates or replacing an IQ device for one with having updated firmware recalling a Dataframe file causes the software to report .oif file mismatches. | STN012 |
| PIP USP-2 w/CTs amplifiers | IQ for Windows | CTs amplifiers with USP-2 PIPs show components droping offline in the software for no apparent reason. Amplifiers will lock up requiring a power reset. | STN013 rev1 |
| PIP USP-3 USP-3CN PIP-Lite w/MA02 and CTs amps. | IQwic | Amplifier-specific information such as Model, Serial Number, Scaling Factor and Date Code are Garbled and not showing up properly. | STN014 rev1 |
| All CobraNet Devices | System Architect IQwic IQ for Windows |
Proceedure for updating firmware in CobraNet equipped devices | STN015 |
| PIP USP-2 w/CTs amplifiers | IQ for Windows | The Listen Bus of the USP-2 has noise issues when used in the CTs600 and 1200 amplifiers. | STN016 rev2 |
| I-Tech Series | n/a | I-Tech front panel display is blank but amp works. | STN017 |
| I-Tech Series | IQwic System Architect |
I-Tech amp will not communicate using a network crossover cable | STN025 |
