Search:     Advanced search
Glossary
Knowledge Base / Microphones / Miscellaneous / Which Crown microphone has a connector that fits a mini digital camcorder?


Which Crown microphone has a connector that fits a mini digital camcorder?

Reply: Most camcorders have a stereo 1/8" mic input connector. The Crown Sound Grabber II microphone ($69) has a 1/8" mono phone plug , so you'd also need a Radio Shack 1/8" stereo plug to 1/8" mono plug adapter, part no. 274-0374 ($2.99).


 
Others in this Category
document How do I control Blackberry or cellphone interference in MB microphones?
document How do I combine two mics into one input?
document How should I mike a video shoot?
document Which Crown mic works with a sound card?
document Do you have a surface-mounted (boundary) mic with an on-off switch?
document How do I mike a group discusson for recording and PA?
document Can you recommend a sweat-resistant tape for face mics (headworn mics)?
document How should I mike our congregation with PZMs?
document How should I mike a wedding? (1 of 3)
document How should I mike a wedding (2 of 3)
document How should I mike a wedding? (3 of 3)
document How can I pick up ambient stage sound for in-ear monitors?
document Where do I order replacement parts for my Crown headset?
document How can I mike an observation room with a PZM-10?
document Why is it important to use a matched mic pair for stereo recording?
document How can I make a Mid-Side (MS) stereo mic with PZM and PCC mics?
document What mic would you recommend for voiceover and acoustic guitar?
document Where should I place a PZM-11LL to prevent pickup of duct noise?
document What mic should I use for recording a therapy session?
document What mics are good for a video shoot?
document What is a good spy mic to record conversations?
document How can I mike a group discussion for broadcast?
document How do I record students in a classroom?
document How can I prevent feedback with my lectern microphone?
document Is there a replacement for the Crown PS-24 power supply?
document Do you have a wall-mountable or wireless microphone for voice recognition or handicapped use?
document How can I record dialog and ambience for video?
document Please explain mixer connections, equalizers, compressors, and groups.
document I can't hear my monitor speaker.
document How should I use phantom power?
document How do I purchase Crown products?
document How do I return a microphone for factory service?
document How can I make a line-level to mic-level adapter for my camcorder?
document How to mike a tap dancer?
document How to mike a roomful of computer operators?
document Siren indicator for deaf drivers
document Water-resistant microphones
document How to record direct? Please explain impedances and levels.
document Help choosing a headset microphone
document Picking up birds at a nature center
document PZM mounting and waterproofing
document Miking a classical music ensemble
document How do I prevent breath pops with the CM-311A?
document Can the PZM-11LLWR be changed from its line-level output to a mic-level output?
document How to mike students and eliminate background noise?
document Where can I get Crown mic parts and service?
document Clandestine listening room
document I need a mixer for a 3-mic PA system
document Please recommend a paging mic for the Crown 180MA mixer-amp.


Powered by KnowledgebasePublisher (Knowledgebase software)