Crown Audio by Harman

Search:     Advanced search
Glossary



How to mike a tap dancer?

I have a client who is a tap dancer. He records his dancing on a plywood board. At another studio, he was miked by two pencil condensers pointed at his feet. He thought the sound was okay but could be better. I thought that to get a better sound, and stay in budget, I would use a pair of Crown Sound Grabber II PZMs on the board plus a condenser pointed at the feet, but further back to pick up more room sound. Suggestions?

Reply: How about a pair of Sound Grabber II mics on the floor a few feet from the board? That way the mics would not get stepped on, and you'd pick up more room sound. You might not even need to use the condenser mic.

Or, you could place the Grabbers under the board on the floor to get more low-frequency thump, and use the condenser to get the high-frequency taps.

Others in this Category
document How do I control Blackberry or cellphone interference in MB microphones?
document How do I combine two mics into one input?
document How should I mike a video shoot?
document Which Crown mic works with a sound card?
document Do you have a surface-mounted (boundary) mic with an on-off switch?
document How do I mike a group discusson for recording and PA?
document Can you recommend a sweat-resistant tape for face mics (headworn mics)?
document How should I mike our congregation with PZMs?
document How should I mike a wedding? (1 of 3)
document How should I mike a wedding (2 of 3)
document How should I mike a wedding? (3 of 3)
document How can I pick up ambient stage sound for in-ear monitors?
document Where do I order replacement parts for my Crown headset?
document How can I mike an observation room with a PZM-10?
document Why is it important to use a matched mic pair for stereo recording?
document How can I make a Mid-Side (MS) stereo mic with PZM and PCC mics?
document What mic would you recommend for voiceover and acoustic guitar?
document Where should I place a PZM-11LL to prevent pickup of duct noise?
document What mic should I use for recording a therapy session?
document What mics are good for a video shoot?
document What is a good spy mic to record conversations?
document How can I mike a group discussion for broadcast?
document How do I record students in a classroom?
document How can I prevent feedback with my lectern microphone?
document Is there a replacement for the Crown PS-24 power supply?
document Do you have a wall-mountable or wireless microphone for voice recognition or handicapped use?
document How can I record dialog and ambience for video?
document Please explain mixer connections, equalizers, compressors, and groups.
document I can't hear my monitor speaker.
document How should I use phantom power?
document How do I purchase Crown products?
document How do I return a microphone for factory service?
document How can I make a line-level to mic-level adapter for my camcorder?
document How to mike a roomful of computer operators?
document Siren indicator for deaf drivers
document Water-resistant microphones
document How to record direct? Please explain impedances and levels.
document Help choosing a headset microphone
document Picking up birds at a nature center
document PZM mounting and waterproofing
document Miking a classical music ensemble
document How do I prevent breath pops with the CM-311A?
document Can the PZM-11LLWR be changed from its line-level output to a mic-level output?
document How to mike students and eliminate background noise?
document Which Crown microphone has a connector that fits a mini digital camcorder?
document Where can I get Crown mic parts and service?
document Clandestine listening room
document I need a mixer for a 3-mic PA system
document Please recommend a paging mic for the Crown 180MA mixer-amp.