Crown Audio by Harman

Search:     Advanced search

Where can I get a mounting kit and GLM-200 to go with my L.R. Baggs transducer?

I have a L.R.Baggs transducer and internal microphone mounted in my Guild D50.They are run through a L.R.Baggs Mix-Pro external pre-amp. I would like to replace the present mic with a Crown GLM-200.Where can I get a mounting kit and GLM-200? Will my Mix-Pro match the GLM requirements?
Thanks…David McClelland

Reply: The Crown GLM-200 hypercardioid condenser mic is available for about $200 and up (street price). Just do a search for GLM-200 on to find a dealer that you prefer.

The mic comes with a 4-inch flexible wire with a clip on both ends (GLM-UM Universal Mount) and a GLM-TB tie bar. Using those two accessories, you can make a guitar mount.

Aim the FRONT of the mic toward the player, away from the strings. The word FRONT is on the front of the mic capsule.

You will need to unsolder the GLM mic cable from the mic's circuit board, which is inside the XLR connector. Here's how:
1. Take out the screw in the XLR connector.
2. Unscrew the nut that is part of the helix-shaped flex relief.
3. Gently pull on the XLR pins to pull the circuit board out of the XLR shell.
4. Unsolder the mic-cable red, white, and shield leads from the circuit board, and pull the cable out of the XLR shell.
5. Solder the mic-cable white lead to a 1/4" phone-plug tip terminal, and solder the red lead and shield to the phone-plug ground terminal.

The Mix-Pro should be able to power the GLM-200 mic capsule through that phone plug .

Others in this Category
document How can I reduce breath pops in the CM-200A?
document Using CM-31 mics. How do I reduce hum?
document How do I hang CM-31 mics for a musical?
document How do I mike a conference with CM-30 or CM-31 hanging mics?
document What is a Differoid?
document I have questions about the CM-310A gain before feedback and off-axis rejection.
document What is the history (past models) of the CM-310A?
document Can I mix a GLM-200 with a pickup?
document How can I phantom power my GLM-200E or GLM-100E?
document Should I use a Sound Grabber or GLM-100 to mike a piano?
document How can I mount a GLM-100 or GLM-200 on my fiddle?
document Can I mike my drums in stereo with a GLM-200 pair?
document What is the range of motion of an LM-201 arm?
document How do I control Blackberry or cellphone interference in MB microphones?
document How can I use a measurement microphone near a boundary?
document How can I order an MB-1 dust cover for the table insert?
document How do I convert a GLM-100 (wired) to GLM-100E (wireless)?
document Accordion
document Compatible wireless systems for GLM-100E, CM-311AE or CM-312AE
document How do I prevent breath pops with the CM-311A?
document Miking a Leslie speaker with GLMs
document What is the best mic to use to mic young children in a church drama?
document I need a mixer for a 3-mic PA system
document Please recommend a paging mic for the Crown 180MA mixer-amp.
document Fishman system with Crown GLM-200E mic
document Powering a CM-30 mic that has no XLR connector