Search:     Advanced search
Glossary
Knowledge Base / Networked products


Sub Categories
 
folder IQ Network Software
FAQs about working with Crown IQ For Windows and IQwic software.
 folder Legacy IQ Network Products
Information about the use of older discontinued IQ Network (IQ System) products.


Showing: 1-20 of 33    »»
Articles
 
document Where can I find retail prices for Crown products?
for retail prices for Crown products.
document How much faster is TCP/IQ than the IQ Bus ?
More than 2,000 times faster. The 20 milliamp current loop for IQ Bus communicates at 38.4 kilobits per second. TCP/IQ communicates at 100 Megabits...
document How do I assign addresses, either IQ, TCP/IQ, TCP/IP, Subnet Mask, or Cobranet?
For the IQ components, the 20 milliamp product has DIP switches located on the product, or with the front panel controls for the USM-810 family of...
document Will the new TCP/IQ products work with the 20 mill current loop products?
Yes, however a 20 milliamp gateway is required, or an interface. The way this is accomplished is that the computer would have the legacy product...
document What is a Mac Address?
This parameter is configured at the factory and is read-only. The setting defines a unique IEEE802-recognized address for use with any Ethernet based...
document Why are there IQ and TCP/IP addresses?
There are TCP/IP and IQ addresses as a way of making it simpler to identify a device. Each device can actually have two IP addresses; one for the...
document How do I change a Mac Address?
One can not change a Mac Address. They are registered with IEEE and each company is given a batch to use. The Mac Address is assigned to the product...
document What amplifiers do the IQ-PIP-Lite work with?
CTs 2 Channel, MA02 Series, CT10 Series, and amplifiers with USP Adapter card installed (however not all features will be available). Also only the...
document When will the BSS 8810C be able to talk TCP/IQ?
The PS8810C has been shipping with TCP/IQ since January of 2003. To upgrade a PS8810C to TCP/IQ requires new firmware that can be found on the . This...
document What amplifiers do the IQ-PIP-USP3 work with?
CTs, MA02 Series, CT10 Series
document What amplifiers do the IQ-PIP-USP3/CN work with?
CTs 2 Channel, MA02 Series, CT10 Series except for CT210 without a fan. A fan for the CT210 can be ordered from parts.The heat generated in the...
document I have set up a TCP/IP address and a default gateway, but I can not see the products on another VLAN.
The Router must be defined using TCP/IQ Utility;This router is the acutal hardward router that is doing the VLAN. This has to be done for each...
document What is the difference between USP3/CN and a USP2/CN?
USP3/CN allows for TCP/IQ control and CobraNet in the same 100MB Cat 5 cable The USP3/CN has analog audio inputs 64 assignable filters with 9...
document What is the difference between IQ-PIP Lite and MEM and SMT?
The IQ PIP Lite is more than 2,000 times faster No IQ Address DIP switches for the PIP Lite. Load Monitoring (not available in MEM) The PIP Lite...
document Why are there IQ addresses greater than 250, I thought those were not allowed
TCP/IQ component addresses can be 1 to 65,535. Component addresses are set in software, there are no hardware DIP switches. Each TCP/IQ component on...
document Why are there so many addresses, IQ, TCP/IQ, and Mac Address?
They are various ways of refering to basically the same information. However there are varying degrees of expressing it. A Mac Address is the IEEE...
document How do I save a preset in a USM-810?
This can only be done online. The preset is saved in the unit, it is not saved as part of the dataframe. If you want to save 32 presets to files, you...
document How do I save a preset on a PIP card?
This can only be done online. The preset is saved in the unit, it is not saved as part of the dataframe. If you want to save 10 presets to files, you...
document How do I assign a control to the USM810 control port?
The Multi-Function Control Port provides a means for external monitoring and control of objects within the USM-810. The Control Port has sixteen...
document How can I lock the front panel of the USM-810?
On the general tab of the USM-810 from there is a button that indicates "Lock Out Front Panel Controls" Engage this button on to make it so...


Powered by KnowledgebasePublisher (Knowledgebase software)