Crown Audio by Harman

Search:     Advanced search
Glossary



Showing: 1-18 of 18  
Articles
 
document How do I wire my CM-311AE or CM-312AE to a Mipro transmitter?
Shown below is a wiring drawing from a Mipro bodypack transmitter manual. If your transmitter has a 4-pin mini-XLR connector (also called TA3M...
document How can I protect the mic capsule in my CM-312A?
Get a bottleneck for a slide guitar. Put some electrical tape over one end, and slide the bottleneck over the mic capsule.   Crown mic...
document Should the CM-311AE distort?
How loud would one have to sing for a CM-311AE to distort? I am getting a lot of comments from some of the guys who do production for my band that I...
document What's the difference between the CM-311AE and the CM-312AE?
The CM-311AE mic capsule is directly in front of the mouth with lips touching the foam windscreen. The mic has extremely high gain before feedback...
document Should I run my CM-311A off phantom power, or use the battery in the beltpack?
The battery turns off automatically when phantom is on, so I'd suggest that you use phantom power to increase battery life.
document How do I control boom bounce in the CM-311A?
My CM-311A headworn mic is moving up and down with my movements as a drummer. What should I do to prevent this? R. Blume Reply: Make sure that...
document How do I reduce drum pickup with the CM-311A?
I use my CM-311A mainly for singing backup vocals while playing drums. My problem is that the mic is picking up everything: my vocals plus the entire...
document How do I wire a CM-311AE or CM-312AE to a Sennheiser Evolution transmitter?
The Crown CM-311AE or CM-312AE headworn mic works with Sennheiser's new Evolution G2 transmitter. You'll need to solder a 3.5mm (mini) stereo phone...
document Where else can I attach the CM-311A beltpack?
I have a Crown CM311A with the belt-clip bodypack. It is is great except that many of my outfits don’t actually have a “belt” or...
document How do I convert a CM-311A to wireless?
It's easy to use the CM-311A headworn mic either wired or wireless. For wired use, plug a mic cable into the belt pack's XLR connector. For wireless...
document How do I fit the CM-311A or CM-311AE to my head?
I just got a CM-311AE microphone. I don't know how to adjust the microphone to fit my head, so it doesn't fall off during performances. I do a lot of...
document How do I make a CM-311AE or CM-312AE hard wired?
I've certainly enjoyed reading your articles in the trade press over the years. I just bought a CM-311AE without understanding that it wasn't fully...
document How do I reduce breath pops with the CM-311AE?
I am using a CM311AE with a wireless system. I like the sound except that the mic seems to be sensitive to pops from those pesky P's, S's, T's, CH...
document What are the pop filters for the CM-311A?
I traded up my CM-312A for a CM-311A.I noticed that there are three available pop screens. I don't understand the terms...
document How do I prevent turn-on pops with the CM-311A?
We recently purchased a CM-311A mic and absolutely love it. One issue we have, however, is that when we switch it on it makes loud pop in our PA...
document Help choosing a headset microphone
My boss and I are trying to find a headset microphone of the highest quality that would be suitable for a one-time radio show recording, but that...
document Compatible wireless systems for GLM-100E, CM-311AE or CM-312AE
Could you provide a small list of compatible or suggested systems to attach the GLM-100E to? Chris Reply: The GLM-100E (or CM-311AE and CM-312AE)...
document How do I prevent breath pops with the CM-311A?
Try a noise gate, which turns down the volume during pauses in speech, so it reduces breath noises. Noise gates are available in hardware or...