Jump to content


Member Since 08 May 2014
Offline Last Active May 22 2014 08:47 AM

Posts I've Made

In Topic: Issue MA-5000i

21 May 2014 - 09:48 PM

updated the firmware tonight and no change.

In Topic: Issue MA-5000i

18 May 2014 - 08:34 PM

View Postdakos, on 18 May 2014 - 03:52 PM, said:

There seems to be a bigger problem with the amp then the difference in SPL. I would first try a firmware update or upgrade, check if the problem is resolved. If it's not solved and the firmware update DIDN'T go through all the way, I would try the same thing on a different computer. Did you at any time lock the amp?

Can you verify the 6dB difference between channels with a true RMS DVM (use a signal that doesn't exceed the range of the DVM)?
I will measure and see.  I can hear the difference in the 2 channels through the speakers.

I believe this is the amp that Audio Architect informed me needed a firmware update.  Any special procedure or tips before the update?

In Topic: Issue MA-5000i

18 May 2014 - 09:30 AM

the system is hooked up running stereo.

In Topic: Issue MA-5000i

18 May 2014 - 09:25 AM

View Postdakos, on 18 May 2014 - 04:29 AM, said:

Could you be using a balanced cable on one channel and unbalanced on the other?

sorry should have said, -6db on the output side.  the input meters are reading level.

In Topic: Preset indicator ma5000i and ma9000i

12 May 2014 - 04:35 PM

Yeah rear flashing Preset Indicator LEDs.