Jump to content


DJSlyfox

Member Since 19 Jun 2013
Offline Last Active May 26 2014 06:34 PM
-----

Topics I've Started

Macrotech 5000i data light

26 May 2014 - 08:33 AM

The data light on one of my  ma-5000i keeps blinking whether or not an ethernet cable is connected via a laptop. Also, with this problem, the amplifier powers on, but the green ready light remains off as well as the green signal light is off when a signal is present. I tried connecting the amplifier via system architecture but i receive no communication/control.

Macrotech 12000i/9000i overheating problems, ready light off

04 September 2013 - 01:51 PM

Hi i currently own 8 macrotech 12000i amps as well as 8 9000i. The problem im having is one of the 12000i amplifiers the ready light isnt coming on. I assume its due to heat since this particular amp was in such environment. Is there a way to troubleshoot this problem? I have read that it may be the thermistor at fault. Also, most of my amplifier fans are racing off really loud after about 10minutes into turning them on. Im worried these may overheat on a gig and go into "standby" just as one of my current 12000is. Thanks in advance