please pardon my inexperience. I have (2) xls2500 bridged, each driving 2 harbinger hx118s subs . I also use (2) xls1500 bridged each driving 2 yamaha s115's My problem is the kick drum clips the 2500's regardless of what I do. I use a d112 for the kick, run thru a mackie vlz1604. This past weekend, played to 500+ people, large venue. Could not run sub amps above past 3rd click without clipping/distortion. What the heck am I missing?
I am looking for advice on lpf & hpf settings on xls series. My set up is xls2500, bridged (2) each connected to 1 or 2 HX118s subs (depending on room size) xls1500, bridged (2) each connected to 1 or 2 yamaha S115IV (same as above) I run thru a drive rack PA+ and have current firmware loaded My question is what freq I should use in bridged mode for the LPF and HPF to best protect the speakers?
Find content
Not Telling
