mazter2369

Hi again so I'm not sure if I should continue this thread since its still pertaining to the crown xti 2000.
I'm currently awaiting 2 nady psw152 subwoofer boxes to arrive with 2 15" subwoofers in each box for a total for 4 15" subwoofers my question is this does anyone have any suggestions as to the proper configuration for the amps internal crossover

Here's a link to the specs on the nady psw152
http://nady.com/manu...udio/pws152.pdf

Thanks for the help guys

dakos, on 01 June 2012 - 06:30 AM, said:

any idea what this means in band manager error log and how to fix it?
"Missing DeviceInfo file: C:\Program Files\Harman Pro\Band Manager 2.0\devices\Crown.CDi Series.deviceinfo"

dakos, on 27 May 2012 - 12:37 AM, said:

It has banana plugs on amp end and 1/4 on speaker end sorry for the delay Dps is off I have signal on both channels but can only run the amp bridged or only one channel at a time and I've also noticed recently that the amp shuts down signal to the speakers after turnin the amp off and back only works again I'm starting to think the ribbon cable may be bad but I've check the serial and it isn't listed as having the problem I noticed tonight that the speakers stopped working and after powering it off and back on the speakers were working with the nobs turned down I tapped the front and they stopped then worked after I turned the nobs up and as far as I know I have the current firmware thanks for all suggestions

dakos, on 25 May 2012 - 10:21 PM, said:

dps is off and i'm using a cable with 1/4" plugs on the end