313DJ

ok cool thanks a lot

hello dakos it's been a while,and now i know y u said the processing on the itechs are superior to the drpa's,but i have a question,i now have 4 ev qrx 218s dual 18 subs,is it ok to run the 4 subs on the 1 itech 8000,for a 5 hour gig,and will that work on a 20amp circuit,i'm also planning to run 4 ev zx5's on my itech 6000,subs are rated at 1200 rms,the tops are rated at 600rms per box,thanks in advance

thanks dakos appreciate it a lot,starting to really like these itechs

hello dakos the gig this past sat. night turned out really well,much thanks to u the zx5's sounded great paired with the qrx 218s's,i have a couple of questions,wanted to know if i could get the peak voltage limiter settings for my jbl srx715 800 watts continous/1600 program/3200 peak 8ohms running them off of a itech 6000,

2nd question,thinking about running 3 of my ev qrx 218s's (1200 cont. 4800 peak) off of my itech 8000 lets say if on the rms limiter i would usually set it at 1200 watts each chanell,if i used 1 on 1 channel which is a 4ohm load,and 2 on the other channel,would i give that chanell with the 2 subs which would be a 2ohm load 2400 watts on the rms limiter?also what would be my peak voltage settings for the chanell with the 2 ohm load,thanks in advance

no i'm just using the factory settings for timing,and one more question should i continue to use my bbe sonic maximizer before the amp or go straight from the mixer to the amp