Jump to content


kapou

Member Since 19 Jan 2012
Offline Last Active Feb 19 2014 12:23 PM
-----

Topics I've Started

Xti 6002 blew up tweeter coil

07 February 2014 - 02:10 AM

Hi friends,  My Xti 6002 is giving another problem. I use yamaha R215 speakers which has 4 ohms rating and 1000watt program output. The amp blew up both the left and right tweeter coil and had to be replaced. I believe it has something to do with voltage fluctuation. I don't use a CVT for the system to control voltage fluctuation and the coil was blown when the voltage was low. Crown wrote an article about tweeter coil being blown if the amplifier power output is lesser than the power required by the speakers. Is the same problem being replicated in my system in a different way? I mean like the amp is not getting enough voltage to drive the speakers and hence blew up the tweeter coil... Can anybody advice me on setting up power system required for live application? Thanks

Crown XTI 2 Wifi setup for system architect

05 December 2013 - 08:42 AM

Hi dear friends,
I recently bought a Crown XTI 6002 amplifier. I am new to the amplifier and I absolutely have no idea in setting up the amp to connect with system architecht through wifi. I couldn't get the USBX here in india so I tried with household 802.11 b/g/ router which has a usb port. The software detect the wifi signal but not the amp connected to the router through usb cable. There is no problem in connecting the amp to band manager through usb cable but I couldn't connect it to system architect. Can anybody help me in setting up a wifi system other than with USBX. I have system architect 3.40 running on windows 7 ultimate 64 bit. Thanks