Jump to content


CTS 600


  • Please log in to reply
No replies to this topic

#1 maple

maple
  • Members
  • 4 posts

Posted 16 March 2006 - 09:20 PM

I had a CTs 600 with blinking light upon power up, it was built September '05 & had all (I think) the required modification updates on it. The blue power LED just flash once then goes off immediately following by blinking Fault LEDs. There's no evidence of blown components & I had pulled out the output devices along with the drivers to check, none are faulty right through the output stage. What could be wrong??? blink.gif