I recently bought 3 K2 amplifiers with some scrathes on the front to my home cinema. Does anyone know if it`s very expensive to change the frontplates and if itīs difficults to do it by my self.
If someone is looking for a amplifier to your stereo or cinema i strongly recomend K2.
regards mats
1
K2 faceplate change.
Started by matsj, Mar 11 2006 07:01 AM
1 reply to this topic
#2
DGlass
-
- Members
-
- 2,541 posts
.
Posted 15 March 2006 - 12:33 PM
You would have to check with our parts department on the current parts pricing for a front panel and the overlays.
This is not an easy job but it can be done. You will need to remove the bridge-rectifier board, the display board and the transformer. The transformer is also attached to the front panel.
You may also need a transformer mount if you should break it while removing the transformer.
This is not an easy job but it can be done. You will need to remove the bridge-rectifier board, the display board and the transformer. The transformer is also attached to the front panel.
You may also need a transformer mount if you should break it while removing the transformer.
