Jump to content


No serial communications Ps8810


  • Please log in to reply
3 replies to this topic

#1 martinvankouwen

martinvankouwen
  • Members
  • 1 posts

Posted 27 February 2004 - 05:50 AM

:( I can only control my ps8810 with the IQwic TCP/IP software.
There is no reaction on my ps8810 serial com. port??

#2 KWhitehead

KWhitehead

    Power User

  • Crown Staff
  • 34 posts

Posted 27 February 2004 - 12:01 PM

If your PS8810 is a cobranet model then you can only communicate using the network connector. If it's a PS8810 non-CobraNet then the RS232 should work with IQ for Windows not IQwic. If it's a non corbranet model try using a new RS232 cable and use the latest IQ for Windows software. If that doesn't work then it may be the UART chip on the system control board has failed.

#3 cptse

cptse
  • Members
  • 1 posts

Posted 28 February 2004 - 07:15 PM

I want to control the PS8810C through RS232 by AMX, is it possible to downgrade a PS8810C to the PS8810?

#4 Bradford Benn

Bradford Benn

    Power User

  • Admin
  • 1,025 posts

Posted 01 March 2004 - 05:07 PM

Yes, it is possible. It is a two step process. The easiest way to accomplish this task is to contact David Glass at Crown and he can walk you through the process.

There is also a UDP developer's kit available to allow AMX to control the TCP/IQ version via a standard network.
-=Brad

Bradford Benn
Business Development Manager - Crown International
http://www.crownaudio.com/