Hello,is there any one out there that can tell me how to get static out of my k2s gain controls ?When i mess with the gain buttons on the front of my amp they is alot of static and some popping in the both channels.i think they are just dirty and need a good cleaning.Please help!i love my k2 thanks curtis
2
K2 Static
Started by 1budd34, Nov 12 2005 09:45 PM
1 reply to this topic
#2
DGlass
-
- Members
-
- 2,541 posts
.
Posted 14 November 2005 - 09:41 AM
With no signal passing though the amp rotate the level controls quickly up and down all the way. By moving them up and down several times they will usually clean themselves.
If this doesn't clean them up then the pots will need some good contact cleaner sprayed into them. The board that the level controls are mounted on is not the easiest to access and it would be best to have a service center perform the job as the front panel will need to be removed.
If this doesn't clean them up then the pots will need some good contact cleaner sprayed into them. The board that the level controls are mounted on is not the easiest to access and it would be best to have a service center perform the job as the front panel will need to be removed.
