Hi everybody.
I've got a dataframe file involving some IQ PIP USP2 modules.
I want to realize another dataframe involving an identical number of IQ PIP USP3 modules with the same internal settings of the previous ones.
Is there a way to automatically import the configuration of similar blocks between these two different modules (I mean, parametric filters, compressor settings, and so on...), or do I have to write down another dataframe, setting all the parameters from the beginning?
And then, may I be sure that one amplifier equipped with one IQ PIP USP2 or one IQ PIP USP3 module with identical settings, will "sound" the same manner?
Thank you.
2
data translation between different PIP modules
Started by morenozampieri, Jan 18 2004 09:15 AM
1 reply to this topic
#1
morenozampieri
-
- Members
- 12 posts
Posted 18 January 2004 - 09:15 AM
Ing. Moreno Zampieri
Audio Equipment S.r.l.
Via Don Minzoni, 17- 20052 Monza (MI) - ITALY
Phone: +39.(0)39.21.22.207
Fax: +39.(0)39.21.40.011
moreno.zampieri@audioequipment.it
Audio Equipment Srl
Audio Equipment S.r.l.
Via Don Minzoni, 17- 20052 Monza (MI) - ITALY
Phone: +39.(0)39.21.22.207
Fax: +39.(0)39.21.40.011
moreno.zampieri@audioequipment.it
Audio Equipment Srl
#2
DGlass
-
- Members
-
- 2,541 posts
.
Posted 20 January 2004 - 10:36 AM
The processors are different between the two USP products and there is no direct way of copying settings from one to the other. The files for the USP-3 will have to be set up manually.
The only difference would be in a parametric cut filter. A different algorithm was used in the USP-2.
The only difference would be in a parametric cut filter. A different algorithm was used in the USP-2.
