Jump to content


Crown USBx


  • Please log in to reply
2 replies to this topic

#1 itech6k

itech6k
  • Members
  • 11 posts

Posted 20 August 2013 - 08:23 PM

Has anyone used this device yet?

Can you link iTech amps through the network port at the same time as XTI's on the USB port?

I don't care what it costs, just that it works good!

#2 AudioGuy67

AudioGuy67
  • Members
  • 3 posts

Posted 05 November 2013 - 02:50 PM

I have one and have been experimenting with it... I find that it works well... I have a mixture of macro 02, Itech and XTI amps in my system... It gives you access to pretty much the same parameters as the Macrotech and Itech amps... Every once in a while it gets stupid and won't populate the amps attached to it and you have to pull the usb and plug it back in... It seems to be sensitive to what order things are powered up and I haven't figured out what that order is yet... Pulling and plugging seems to work, so I just do that... The USB protocol is 1.1, that seems slow, but I can't really see the difference when making adjustments... Other than that, it seems to work well with System Architect and Audio Architect...

#3 itech6k

itech6k
  • Members
  • 11 posts

Posted 17 December 2013 - 07:32 PM

I just received my USBx and have had success linking itech and XTI amps.

Does your USBx have an unbelievably loud internal fan???