xti2 setup help
Posted 17 May 2013 - 02:31 AM
4 - Vrx932la
4 - Vrx918s
2 - XTI6002
2 - XTI4002
1 - DBX260
Posted 24 May 2013 - 04:18 PM
Unless there's e specific feature you need from the DR260, I would skip using it, there's a small benefit in sound quality if you pass through less AD/DA transitions for the same function you already have in the XTi DSP.
As for configuration, this is where things get a bit difficult, despite all these amps being reliable at 4 ohm bridged, this mode of operation is not recommended, do you have more amps for me to work with? Is an upgrade an option?
You really need itech's or mai's for those speakers to shine...
Posted 30 May 2013 - 12:41 AM
you think i should sell my amps? yes upgrade is an option.
let me know what can i do to make it shine thank avi
Posted 30 May 2013 - 03:55 PM
To really make'm shine:
2X i-Tech 12000 (new) OR 8000 (used) for everything, one for the subs and one for the tops.
Posted 31 May 2013 - 09:33 AM
Always make sure that the AC power supply has enough current for the job! Voltage is all accessory. (Correct me if I'm wrong!)