Jump to content


Any help ----Amplifier recommendations for a pair of JRX115

JRX115

  • Please log in to reply
2 replies to this topic

#1 AHH

AHH
  • Members
  • 4 posts

Posted 18 April 2013 - 09:52 PM

What amplifier would you recommend for powering 2 JBL JRX115
Currently, I use a Crown XLS2500 to power the 2 speakers. it is rated at 440 Watts @ 8 Ohms
This is what JBL recommends: 250 W to 500 W into 8 ohms.

Also, is this capable of driving 4 JBL JRX115


what size amplifier would you recommend to run 2 JRX118S for the same PA setup

Thank You!

#2 AHH

AHH
  • Members
  • 4 posts

Posted 21 April 2013 - 09:54 PM

Nice Group

#3 dakos

dakos

    Admin

  • Members
  • PipPipPipPipPip
  • 634 posts

Posted 03 May 2013 - 08:13 PM

Hello,
Your question might seem simple but it has baffled many of us many times, I don't know if you're looking for the simple answer or the more complex right answer so I'll give you both...

The complex answer is here:
http://www.crownaudi...st=0#entry16886
You'll probably have more questions after this read so fire on...

The short answer for the 118 is the XLS 1000 or 1500 bridged on each sub or one XLS2500 for both.
Hope this helps
Avi