NEED HELP WITH MY CROWN IT 6000,8000 PEAK VOLTAGE LIMITER SETTINGS,AND XOVER,CROWN ITECH PEAK VOLTAGE CROSSOVER
Posted 22 November 2013 - 12:17 AM
Can you please help me with timing? attack and release times? have you figured them out yet? for JBL SRX722, 712, 728, 715 and 718 using crown itech 6000
Posted 22 November 2013 - 11:11 AM
The timing settings you asked are different for every speaker and also if you biamp them or not, so could you please describe your rig in more detail.
Posted 11 August 2014 - 03:08 PM
Doesn't matter for which i-Tech the settings are for, just the speakers, so for the JBL SRX725:
Peak Limiting voltage = (SQ Root (2)) X SQ Root (Peak speaker rating * speaker impedance)/2= SQ Root (4800X4) X 0.707=98V
Continuous/RMS limiter setting for the 725:
1200W/4 (to get 12dB)= 300W
may i revive this thread asking how to adapt the mentioned JBL SRX 725 to the LevelMax Funktion of the I-Tech HD's?
The values known&given for the 725s are RMS/Program/Peak 1200/2400/4800 on 4 ohms.
The values needed for feeding the LevelMax are AES Power/WRMS 2h and 100h. Is there a way to translate the RMS/Program etc wattage into the values in question?
thanks for any support :-)
Posted 13 August 2014 - 07:22 PM
Not that I know of. You would need to contact JBL directly for those figures.
Another option would be to load the presets for the srx to the itech HD and see what JBL put there if they did ake presets for the SRX for the HD amps.
Let us know what you find out.
Posted 19 August 2014 - 05:51 AM
thanks for your reply. I just got an answer from out local JBL support here in Germany, Audio-Pro.