Jump to content


System Setup


  • Please log in to reply
3 replies to this topic

#1 Kenneth133

Kenneth133
  • Members
  • 4 posts

Posted 25 April 2012 - 06:18 PM

Just got a new setup and trying to figure out the best way to get the most out of it.  i have the fillowing:
2 JBL SRX 715's
1 JBL SRX 728
2 XTI2 4002 currently bridged 8 ohm's one to each 715
1 PLx 3602 bridged mono to the 728
1 drive rack
and various other Mobile DJ equipment..  

how should this be setup to protect the equipment and get the best and loudest sound.  

thanks

ken smith
smithkj133@comcast.net

#2 dakos

dakos

    Admin

  • Members
  • PipPipPipPipPip
  • 634 posts

Posted 26 April 2012 - 01:11 AM

QUOTE(Kenneth133 @ Apr 25 2012, 06:18 PM) View Post
Just got a new setup and trying to figure out the best way to get the most out of it.  i have the fillowing:
2 JBL SRX 715's
1 JBL SRX 728
2 XTI2 4002 currently bridged 8 ohm's one to each 715
1 PLx 3602 bridged mono to the 728
1 drive rack
and various other Mobile DJ equipment..  

how should this be setup to protect the equipment and get the best and loudest sound.  

thanks

ken smith
smithkj133@comcast.net

Welcome to the forums...

Do you have a bigger amp for the subs? The 3602 is bridged into 4 ohm load and that's not recommended and doesn't sound that good.
Other then that I assume you use the DR wizard to configure your system, it's usually doing a great gob at that. Which DR is it?
Other then that you're pretty much at the max of what the amps can deliver.


#3 Kenneth133

Kenneth133
  • Members
  • 4 posts

Posted 27 April 2012 - 07:05 AM

QUOTE(dakos @ Apr 26 2012, 01:11 AM) View Post
QUOTE(Kenneth133 @ Apr 25 2012, 06:18 PM) View Post
Just got a new setup and trying to figure out the best way to get the most out of it.  i have the fillowing:
2 JBL SRX 715's
1 JBL SRX 728
2 XTI2 4002 currently bridged 8 ohm's one to each 715
1 PLx 3602 bridged mono to the 728
1 drive rack
and various other Mobile DJ equipment..  

how should this be setup to protect the equipment and get the best and loudest sound.  

thanks

ken smith
smithkj133@comcast.net

Welcome to the forums...

Do you have a bigger amp for the subs? The 3602 is bridged into 4 ohm load and that's not recommended and doesn't sound that good.
Other then that I assume you use the DR wizard to configure your system, it's usually doing a great gob at that. Which DR is it?
Other then that you're pretty much at the max of what the amps can deliver.

thanks

right now these are the only ones i have.  i will be upgrading the qsc to a ma 5000 or 9000 for the sub.

will the xti 4002 not power the 715 properly?

#4 dakos

dakos

    Admin

  • Members
  • PipPipPipPipPip
  • 634 posts

Posted 27 April 2012 - 07:21 AM

If it's bridged on each 715 then you have what they need. They can take just a little more (3600W instead of the 2400W) but it wouldn't make an audible difference cause it's less then 3dB.
Try to get the MA9000i, it's a better fit.