XTi 1002 Firmware upgrade failure?
Posted 02 March 2012 - 04:27 PM
Posted 04 March 2012 - 05:26 PM
If you contact Crown about this kferrel, please get back here and let us know the outcome, I'm having similar issues myself. It could be from the firmware update. But I don't know because I'm missing files in the root directory of the Manager software. It makes no sense.
Posted 12 March 2012 - 10:34 AM
Posted 14 March 2012 - 06:32 PM
If you right click on the BandManager2.0.exe, you'll see that the file was created Friday, February 17, 2012 at 7:37:23PM
kferrel posted this on March 12th 2012. One could only assume that he downloaded the software after February which would mean he is using BandManager 2.0. Unless however the software was made available late, which wouldn't surprise me. But kferrel has not specified what software version he is using, I think that kind of matters. kferrel?
Secondly, I think something as important as this should "always" be made more obvious than expecting people to read though though pages of Faq. But it should be there also.
The information below "was" on the software download page but I'm assuming it was added only after they released Band Manager2.0. They should have added this information on the site even before BandManager2.0
IMPORTANT NOTE FOR ORIGINAL CROWN XTi SERIES OWNERS:
Any Crown XTi Series amplifier manufactured before September 19, 2006 or having a serial number lower then 800129400 will require a firmware update. For amplifiers built after this date, the firmware has already been loaded at the factory. The amplifier will communicate with Band Manager without any need for any update. The manufacture date and serial number can be found on the rear of the unit.
Posted 13 April 2012 - 11:02 AM