2 replies to this topic

[matthodkinson]

Hi All

Can someone give me a list of which OIF files apply for each product.

Thanks

[DGlass]

We do not have a published list of IQwic .oif files to device listing. If you open the .oif in a text editor it will give you a description of the IQ device it is associated with.

I did make a listing a while ago and I have updated it some recently. It may not have all the devices but it’s a start.

USM-810    firmware ver 1.00x use USM810.oif
USM-810    firmware ver 1.10x use USM110.oif
PS8810     firmware ver 2.00x use USM200.oif  (Non-TCP/IQ)
PS8810     firmware ver 2.10x use USM210.oif  (Non-TCP/IQ)
PS8810C    firmware ver 2.00x use CNM200.oif  (Non-TCP/IQ)
PS8810C    firmware ver 3.10x use CNM310.oif
PS8810C    firmware ver 2.10x use CNM201.oif
USP-2      firmware ver 1.00x use USP100x.oif (Non-TCP/IQ)
USP-2      firmware ver 1.01x use USP101.oif  (Non-TCP/IQ)
USP-2CN    firmware ver 2.00  use CNP200.oif  (Non-TCP/IQ)
USP-2CN    firmware ver 2.02  use CNP201.oif  (Non-TCP/IQ)
PIP-Lite   firmware ver 1.00  use IPL100.oif
PIP-Lite   firmware ver 1.10  use IPL110.oif
PIP-Lite   firmware ver 1.20  use IPL120.oif
USP-3      firmware ver 1.00  use PSH100.oif
USP-3      firmware ver 1.10  use PSH110.oif
USP-3      firmware ver 1.20  use PSH120.oif
USP-3CN    firmware ver 1.00  use PSN100.oif
USP-3CN    firmware ver 1.10  use PSN110.oif
USP-3CN    firmware ver 1.20  use PSN120.oif
I-Techs    firmware ver 1.10  use ITA110.oif
I-Techs    firmware ver 1.20  use ITA120.oif
I-Techs    firmware ver 1.30  use ITA130.oif
CTs-8200   use MC8200 (Non-TCP/IQ)
CTs-4200   use MC4200 (Non-TCP/IQ)

Non TCP/IQ units need IQ Gateway to be run on IQwic.

[Holger]

We do not have a published list of IQwic .oif files to device listing. If you open the .oif in a text editor it will give you a description of the IQ device it is associated with.

I did make a listing a while ago and I have updated it some recently. It may not have all the devices but it’s a start.

USM-810    firmware ver 1.00x use USM810.oif
USM-810    firmware ver 1.10x use USM110.oif
PS8810     firmware ver 2.00x use USM200.oif  (Non-TCP/IQ)
PS8810     firmware ver 2.10x use USM210.oif  (Non-TCP/IQ)
PS8810C    firmware ver 2.00x use CNM200.oif  (Non-TCP/IQ)
PS8810C    firmware ver 3.10x use CNM310.oif
PS8810C    firmware ver 2.10x use CNM201.oif
USP-2      firmware ver 1.00x use USP100x.oif (Non-TCP/IQ)
USP-2      firmware ver 1.01x use USP101.oif  (Non-TCP/IQ)
USP-2CN    firmware ver 2.00  use CNP200.oif  (Non-TCP/IQ)
USP-2CN    firmware ver 2.02  use CNP201.oif  (Non-TCP/IQ)
PIP-Lite   firmware ver 1.00  use IPL100.oif
PIP-Lite   firmware ver 1.10  use IPL110.oif
PIP-Lite   firmware ver 1.20  use IPL120.oif
USP-3      firmware ver 1.00  use PSH100.oif
USP-3      firmware ver 1.10  use PSH110.oif
USP-3      firmware ver 1.20  use PSH120.oif
USP-3CN    firmware ver 1.00  use PSN100.oif
USP-3CN    firmware ver 1.10  use PSN110.oif
USP-3CN    firmware ver 1.20  use PSN120.oif
I-Techs    firmware ver 1.10  use ITA110.oif
I-Techs    firmware ver 1.20  use ITA120.oif
I-Techs    firmware ver 1.30  use ITA130.oif
CTs-8200   use MC8200 (Non-TCP/IQ)
CTs-4200   use MC4200 (Non-TCP/IQ)

Non TCP/IQ units need IQ Gateway to be run on IQwic.