Jump to content


Connecting Equipment


  • Please log in to reply
3 replies to this topic

#1 Lowell2k9

Lowell2k9
  • Members
  • 10 posts

Posted 13 September 2011 - 06:11 PM

Hello everyone, I just gotten my dream setup. Question is how do I set this up?
I have 2 XTI4002 amps, 2 JBL Srx718 subs, 2 JBL 722 (tops) & a Drive Rack PA Plus. thanks


#2 Kevin Heber

Kevin Heber

    Power User

  • Crown Staff
  • 883 posts

Posted 14 September 2011 - 02:07 PM

Use one 4002 in bridge-mono to drive the subs; the other in stereo to drive the tops.

You can set the PA+ to take care of the processing for both amps.  You should be able to tell the PA+ what amps you have -- use the XTi4000, since the 4002 isn't included yet.

#3 dakos

dakos

    Admin

  • Members
  • PipPipPipPipPip
  • 630 posts

Posted 27 September 2011 - 02:25 PM

QUOTE(Kevin Heber @ Sep 14 2011, 02:07 PM) View Post
Use one 4002 in bridge-mono to drive the subs; the other in stereo to drive the tops.

You can set the PA+ to take care of the processing for both amps.  You should be able to tell the PA+ what amps you have -- use the XTi4000, since the 4002 isn't included yet.


Do you think one 4002 or even the 6002 are a good match for two 718? will the sound be as tight and powerful as the sound coming from one of the IT-HD's?

Since I plan to run a setup very similar to this one, do you think the DriveRack PX will do the same as the DRPA+ for this job when only biamping? Doe's it have the same configuration capabilities/wizards?
Thank you

#4 Kevin Heber

Kevin Heber

    Power User

  • Crown Staff
  • 883 posts

Posted 28 September 2011 - 01:15 PM

My guess is that the 4002 will be passable but not as good as either the 6002 or iT5k, which should sound pretty similar.

As far as the dbx pieces, i don't know those models well enough to comment.