Jump to content


mrx-515 kai Sub


  • Please log in to reply
7 replies to this topic

#1 Argirios

Argirios
  • Members
  • 8 posts

Posted 08 August 2011 - 05:06 PM

?????????, ??? ???? ?????? ???????? ???-2000. ??? ??????????? 2 ?R?-515 ??? ???? ?? ???? ???? 2 SUB ?R?-518S.... ????? ?? ?? ???? ?? ??? ???? ?????????? ??? ??? ????? ?? ?? ???? ?? 2 MRX-515 ??? 1 SUB MRX-518S? ????? ????????? ?? ???? ??? DSP ??? ?? ??? ???? ??? SUB !!

????????? ??? ??????

#2 Kevin Heber

Kevin Heber

    Power User

  • Crown Staff
  • 883 posts

Posted 09 August 2011 - 08:06 AM

Hi, the XTI2000 does not have enough power for both pairs of speakers, or for 3 speakers. However, if you want to try it anyway, you could put both 518S on channel one, and put both 515 on channel 2.  Then set the crossover to 80Hz.  Just make sure the amplifier does not clip. It would be best to have two amps for the four speakers.

???? ???, ?? XTI2000 ??? ???? ?????? ???? ??? ?? ??? ????? ??????, ? ??? 3 ?????. ??????, ??? ?????? ?? ?? ?????????? ???? ??? ??????, ?? ???????? ?? ????? ???? 518S ??? ?????? ???, ??? ?? ????? ??? ??? 515 ??? ?????? 2. ???? ??? ?? crossover ?? 80Hz. ???? ??????????? ??? ? ????????? ??? clip. ?? ???? ???????? ?? ?????? ??? ???????? ????????? ??? ?? ??????? ?????.

#3 Argirios

Argirios
  • Members
  • 8 posts

Posted 09 August 2011 - 02:24 PM

QUOTE(Kevin Heber @ Aug 9 2011, 08:06 AM) View Post
Hi, the XTI2000 does not have enough power for both pairs of speakers, or for 3 speakers. However, if you want to try it anyway, you could put both 518S on channel one, and put both 515 on channel 2.  Then set the crossover to 80Hz.  Just make sure the amplifier does not clip. It would be best to have two amps for the four speakers.

???? ???, ?? XTI2000 ??? ???? ?????? ???? ??? ?? ??? ????? ??????, ? ??? 3 ?????. ??????, ??? ?????? ?? ?? ?????????? ???? ??? ??????, ?? ???????? ?? ????? ???? 518S ??? ?????? ???, ??? ?? ????? ??? ??? 515 ??? ?????? 2. ???? ??? ?? crossover ?? 80Hz. ???? ??????????? ??? ? ????????? ??? clip. ?? ???? ???????? ?? ?????? ??? ???????? ????????? ??? ?? ??????? ?????.


?? ???? 1 XTI-2000 ???????? ? XLS-2500???? ?? SUB'S?? ? ?? ????????????? ?? 1 XTI-4000 ??? ?? 2 MRX-518S & 2 MRX-515?? ??? 2 MRX-518S ????? ????????? ? XTI-2000 ? ? XLS-2500?? ????????? ???? !!

#4 Kevin Heber

Kevin Heber

    Power User

  • Crown Staff
  • 883 posts

Posted 10 August 2011 - 03:16 PM

The XTi2000 is good for running the two 518S in stereo, but not the two 515 in stereo.  If you want to add another amp, the cheapest solution would be to add two XLS1000, one for each 515, running in bridge-mono. Another solution would be to add a XTi4000 to run both 515 in stereo.

? XTi2000 ????? ???? ??? ?? ?????????? ??? ??? 518S ?? stereo, ???? ??? ?? ??? 515 ?? ????????????. ?? ?????? ?? ?????????? ??? ???? ????????, ? ????????? ???? ?? ???? ?? ????????? ??? XLS1000, ??? ??? ???? 515, ?????? ?? ??????-mono. ??? ???? ???? ?? ???? ?? ?????????? ??? XTi4000 ?? ?????? ???? 515 ?? ????????????.

#5 Argirios

Argirios
  • Members
  • 8 posts

Posted 10 August 2011 - 05:25 PM

QUOTE(Kevin Heber @ Aug 10 2011, 03:16 PM) View Post
The XTi2000 is good for running the two 518S in stereo, but not the two 515 in stereo.  If you want to add another amp, the cheapest solution would be to add two XLS1000, one for each 515, running in bridge-mono. Another solution would be to add a XTi4000 to run both 515 in stereo.

? XTi2000 ????? ???? ??? ?? ?????????? ??? ??? 518S ?? stereo, ???? ??? ?? ??? 515 ?? ????????????. ?? ?????? ?? ?????????? ??? ???? ????????, ? ????????? ???? ?? ???? ?? ????????? ??? XLS1000, ??? ??? ???? 515, ?????? ?? ??????-mono. ??? ???? ???? ?? ???? ?? ?????????? ??? XTi4000 ?? ?????? ???? 515 ?? ????????????.


?????? ? XTI-2000 ??? ??? ??? ?? 2 MRX-515 ??? ????? ?????? ?? ??? ???? 1 ???-4000 ??? ?? ??? 2 MRX-515 ??? 2 MRX-518? ?? ??????? ????? ????? ??? ? ???-4000??
???? ?????????? ?? ???? ??? DSP ??? ???-4000??

????????? ???? ??? ??? ????? ???????????

#6 Kevin Heber

Kevin Heber

    Power User

  • Crown Staff
  • 883 posts

Posted 11 August 2011 - 01:05 PM

Use both the XTi2000 and XTi4000 for your 4 MRX speakers, if you just want two amps.  Otherwise use the XTi2000 and two XLS1000's.

You can download and install System Architect to use JBL presets for the XTi amplifiers -- www.hiqnet.harmanpro.com

When you install the software, the presets will be in the \My Documents\Harman Pro\ folder.




?????????????? ??? ?? ??? ?? XTi2000 ??? XTi4000 ??? 4 MRX ????? ???, ??? ?????? ???? ??? ?????????. ???????????, ?????????????? ?? XTi2000 ??? ??? XLS1000 ???.

???????? ?? ?????????? ??? ?? ????????????? ???????????? ??? ?????????? ??? ?? ??????????????? ??????????? JBL ??? ?????? ????????? - www.hiqnet.harmanpro.com

???? ??? ??????????? ??? ??????????, ??? ??????????????? ????????? ?? ????? ??? \ My Documents \ Harman Pro \ ??????.

#7 Argirios

Argirios
  • Members
  • 8 posts

Posted 12 August 2011 - 11:35 AM

QUOTE(Kevin Heber @ Aug 11 2011, 01:05 PM) View Post
Use both the XTi2000 and XTi4000 for your 4 MRX speakers, if you just want two amps.  Otherwise use the XTi2000 and two XLS1000's.

You can download and install System Architect to use JBL presets for the XTi amplifiers -- www.hiqnet.harmanpro.com

When you install the software, the presets will be in the \My Documents\Harman Pro\ folder.




?????????????? ??? ?? ??? ?? XTi2000 ??? XTi4000 ??? 4 MRX ????? ???, ??? ?????? ???? ??? ?????????. ???????????, ?????????????? ?? XTi2000 ??? ??? XLS1000 ???.

???????? ?? ?????????? ??? ?? ????????????? ???????????? ??? ?????????? ??? ?? ??????????????? ??????????? JBL ??? ?????? ????????? - www.hiqnet.harmanpro.com

???? ??? ??????????? ??? ??????????, ??? ??????????????? ????????? ?? ????? ??? \ My Documents \ Harman Pro \ ??????.


O XTI-2000 ?? ???????? ??? 4 MRX-515 ???????
????????? ??? ??? ???????????

#8 Argirios

Argirios
  • Members
  • 8 posts

Posted 03 September 2011 - 07:48 AM

O XTI-2000 ?? ???????? ??? 4 MRX-515 ???????
?????????