Jump to content


Problem with Crown Xti-2000


  • Please log in to reply
1 reply to this topic

#1 mfredericks

mfredericks
  • Members
  • 1 posts

Posted 23 April 2011 - 05:53 PM

I have had a Crown Xti-2000 for a few years now that i I use on a limited basis.  The last several times I have used it it either produces no sound from channel 1 to begin with or has channel 1 drop out at some point during the performace (mobile DJ work).  If channel 1 starts out with no sound, it is usually able to be recovered by boosting the volume up all the way on the channel.  It seems to me to be a possible short.  I have tested this out with two other systems and I believe I have narrowed the problem down to the amp itself.  Any ideas on how I can fix this myself or does it need to be repaired?

#2 Tom Lureman

Tom Lureman

    Network Newbie

  • Admin
  • 111 posts

Posted 25 April 2011 - 08:35 AM

Please send me an email at thomas.lureman@harman.com with the serial number of the unit and I'll be better suited to help you.