Looking on any information on the best way to tune my XTI-4000 with 2 JBLSRX718's running the AMP in BRIDGE MONO mode with 12ohm speaker cable to first sub, then parrallel to 2nd sub taking them from 8ohm to 4ohm.
I should be getting 1600watts to each speaker if I set this up correctly, but It just seems like I should be getting more BASS. After tinkering with the settings in the HQsoftware it seems like there are endless possibilites in regards to crossovers , etc.....
Does anyone have an exact setting that they have found works good for this setup. I'm a mobile DJ fyi...
XTI-4000 with 2JBLSRX718's in Bridge Mono
No replies to this topic