- - - - -

XTI-4000 with 2JBLSRX718's in Bridge Mono

1 reply to this topic

#1 mike71flores

  • Members
  • 1 posts

Posted 22 April 2010 - 01:24 PM

Looking on any information on the best way to tune my XTI-4000 with 2 JBLSRX718's running the AMP in BRIDGE MONO mode with 12ohm speaker cable to first sub, then parrallel to 2nd sub taking them from 8ohm to 4ohm.

I should be getting 1600watts to each speaker if I set this up correctly, but It just seems like I should be getting more BASS. After tinkering with the settings in the HQsoftware it seems like there are endless possibilites in regards to crossovers , etc.....

Does anyone have an exact setting that they have found works good for this setup. I'm a mobile DJ fyi...


#2 smokey420

  • Members
  • 1 posts

Posted 20 July 2016 - 12:31 PM

Check some youtube video or here. I know audiospeakerworld had some articles on tuning if I remember right.