does any one have simple instructions to allow me to copy all the setting from my 1 itech amp to another. I have sytem archtiecht running but would like some simple guideleines so that i don't screw things up.
thanks
2
itech 6000
Started by djguru, Sep 21 2009 10:50 AM
1 reply to this topic
#2
DGlass
-
- Members
-
- 2,541 posts
.
Posted 21 September 2009 - 12:41 PM
It a fairly simple process. In the Venue View panel:
Saving a Device's settings:
*Right click on the amp to be copied
*In the pop up window select "Save Device File"
*In the "Save AS" window Name the file and Save it someplace you can find it.
Installing a Device File into another amp:
*Right click on the amp to be updated to the other Device's settings
*In the pop up window select "Open Device File"
*In the "Open" window navigate to where the file is stored and select the file
Saving a Device's settings:
*Right click on the amp to be copied
*In the pop up window select "Save Device File"
*In the "Save AS" window Name the file and Save it someplace you can find it.
Installing a Device File into another amp:
*Right click on the amp to be updated to the other Device's settings
*In the pop up window select "Open Device File"
*In the "Open" window navigate to where the file is stored and select the file
