XTI USB Drivers - device cannot be discovered
Posted 17 July 2009 - 04:35 AM
this is the first time i have tried to use the Band Manager / Sys Architect with this XTI 4000 amp, and it is causing me major problems - so i was wondering if you guys have some help for me?
The XTI amp is being recognised as a Realtec Card in my Device Manager, and each time i try and install the amp it's getting stuck in the Mouse+Keyboard section and as such is not being recognised by the Band Manager / Sys Architect Software.
I have a fair amount of IT experience so i have tried deleting it and re-installing it, i have tried searching for software updating the drivers and i am finding nothing - stuck in a loop.
Could someone please point me in the direction of the USB Driver file for XTI Amps and i will be able to specify the file while installing it again.
Thanks in advance for all of your assistance
Posted 18 July 2009 - 02:14 AM
I have just seen that there is a potential USB Driver in the folder that is downloaded for the 'Firmware Upgrade' so i will see if i can download this and then specify the file when installing the device again.
Posted 19 July 2009 - 08:25 AM
2 - I used the Cloader program and ran a full Firmware upgrade, the amp did everything it was supposed to and the connection between PC and amp was perfection in digital communication (success)
3 - Closed Cloader when the amp had rebooted and 'DSP OFF' showing on the LCD front panel, as instructed (success)
4 - Opened Band Manager, no devices found (Failed again)
5 - Uninstalled and re-installed Band Manager, no devices found (Failed again)
6 - Re-installed Sys Architect, no devices found (Failed again)
So to sum up things up:
I have spent hours of my life trying to use this software on my PC. One piece of the Harmon Software is able to recognize the Amp instantly (Cloader Firmware upgrade), where all of the other pieces of Harmon Software do not. The PC had a fresh install of XP last week after reformatting, and has been updated completely with all the official licensed Microsoft products. I do not use a USB hub, there are only 2 other USB ports being used (mouse and Keyboard), all specifications for loading the Harmon Software have been met or exceeded. At the moment i am even contemplating installing Parallels and then XP on to my Macbook in an attempt to get this going.
My final point on this matter:
For the love of God will someone please tell me where i can find the correct USB driver for an XTI amp so my PC will communicate with it
Posted 21 July 2009 - 08:12 AM
-- Hold down all 3 front panel buttons for about 1 second
-- Press NEXT several times until you see the firmware version # -- something like 220.127.116.11
Also, in System Architect, go to tools/options/connectivity settings/manage connections and check to make sure that the list box "USB Devices" is populated with something.
Please let me know what you find.
Posted 21 July 2009 - 11:37 AM
thanks for getting back to me.
My Firmware number is now showing as exactly # 18.104.22.168 after going through the upgrade at the weekend.
I have brought home a works XP laptop to see if this will be more accomodating with the Amp.
I will let you know the result.
The Laptop died a death, black screens etc - so what is your next idea?
Posted 23 July 2009 - 07:58 AM