Jump to content


PZM-10 Sensitivity


  • Please log in to reply
1 reply to this topic

#1 Jaime

Jaime
  • Members
  • 1 posts

Posted 02 March 2008 - 08:42 AM

I have a TOA 9000 Series Mixer with D-001T Modules, and can't get enough sensitivity out of the PZM-10 microphones.  Any ideas?

I enabled the Phamton Power from the TOA modules, and I have the sensitivity on TOA Mixer to the max  -60.  -10 is line level.

I had the same problem with the Polycom Vortex.

#2 MChapman

MChapman

    Power User

  • Members
  • PipPipPipPipPip
  • 126 posts

Posted 03 March 2008 - 09:21 AM

What are you trying to do with the mic? You mention the same problem with a Polycom Vortex, so that leads me to believe it might be an application problem. Please describe in detail what you are using the mic for, the location of the mic in the room, and the room size for starters. Also, how much phantom power is supplied by the TOA mixer? Have you measured it with a meter?
<span style='color:blue'>J. Mark Chapman
Crown Application Support Technician</span>