1) PS8810C display error code E27. It happen again after power reset. What is the error code mean? where can I find the mean of other error code?
2) I setup audio from Cobranet Input to Signal Input 7B but the Input level display the audio is connected to 8B.When the signal Input connect to 8B then the input level display the audio is connected to 7B. (ie Input 7 & 8 swap)
IQwic ver : 7.0
PS8810C firmware ver :3.101
2
PS8810C error code E27
Started by dario, Aug 15 2004 09:51 AM
1 reply to this topic
#2
DGlass
-
- Members
-
- 2,541 posts
.
Posted 16 August 2004 - 11:53 AM
E (Error) codes are used by our service technicians and engineers to determine the internal processing, SHARC processor and Memory errors so they know were to start looking at when repairing a unit.
From the description of the channel swapping and the E code error you should contact ACE the Harman Distributer there in Hong Kong for repair or replacement.
From the description of the channel swapping and the E code error you should contact ACE the Harman Distributer there in Hong Kong for repair or replacement.
