Legacy IQ Help
Posted 05 May 2004 - 03:37 PM
Returning 48 hrs. later ALL PIP's had dropped offline. This is where it gets worse...many attempts loading data files, with various results; miscounts of devices, not seeing devices or even when a roll call was completed successfully no audio would pass, amp ch. muted (manual toggling had no effect). No loop breaks (there are 2) have been detected, and as far as can be determined by us the hardware devices seem to be OK.
We believe that this may be a host computer problem, we have run MS scandisk with no untoward results. (It did however run for about 30 min before PIPs started dropping offline, all in about 10 min.) The RS232 serial port seems to be communicating with the drone ok (roll calls). No outwardly apparent computer issues seem to be present though.
Any one having any similar experience or detailed knowledge of these "older antique" systems please reply. Regards,
Posted 06 May 2004 - 09:32 PM
We also replaced the serial RS232 cable for good measure.
Thanks for your interest.
Posted 07 May 2004 - 10:21 PM
Dave Glass--the SFO Sound Dept will be calling you Monday AM, I'll be giving them your number.
Regards, SFB Sound
Posted 30 July 2004 - 03:30 PM
Posted 11 November 2005 - 11:32 AM
Im working on an older IQ system and might be interested in the White EQ.