Jump to content


XTI 1000 NO SOUND


  • Please log in to reply
4 replies to this topic

#1 DAVE HERGET

DAVE HERGET
  • Members
  • 3 posts

Posted 11 September 2006 - 07:28 AM

AM USING XTI 1000 FOR BI AMP MONITORS CHANNEL A LOW CHANNEL B HI
USING EXTERNAL X OVER
ONE AMP CHANNEL A HAS NO OUTPUT NO LOWS CHANNEL B SEEMS TO BE WORKING FINE CHECKED ALL CABLES FROM X OVER AND SPEAKER CABLES SWITCHED MONITOR TO A DIFFERENT AMP ALL WORKED FINE ANYBODY HAD TROIUBLE WITH THIS THIS WAS THE THIRD SHOW THE AMP WAS USED FOR FIRST TWO THEY WORKED GREAT AND SOUNDED GREAT
THANKS FOR ANY HELP

#2 DGlass

DGlass

    .

  • Members
  • PipPipPipPipPip
  • 2,541 posts

Posted 11 September 2006 - 08:22 AM

What mode is the amp in? Stereo Bridge-Mono?
Do you have anything else engaged in the amp? "Y"? XOV? EQ? Brig Subs?

#3 DAVE HERGET

DAVE HERGET
  • Members
  • 3 posts

Posted 11 September 2006 - 12:07 PM

QUOTE(DGlass @ Sep 11 2006, 07:22 AM)
What mode is the amp in? Stereo Bridge-Mono?
Do you have anything else engaged in the amp? "Y"? XOV? EQ? Brig Subs?
View Post


THE AMP IS IN STEREO MODE  NOTHING ELSE ENGAGED USING AN ASHLY X OVER DSP OFF
THANKS
DAVE

#4 DGlass

DGlass

    .

  • Members
  • PipPipPipPipPip
  • 2,541 posts

Posted 13 September 2006 - 09:28 AM

QUOTE(DAVE HERGET @ Sep 11 2006, 01:07 PM)
QUOTE(DGlass @ Sep 11 2006, 07:22 AM)
What mode is the amp in? Stereo Bridge-Mono?
Do you have anything else engaged in the amp? "Y"? XOV? EQ? Brig Subs?
View Post


THE AMP IS IN STEREO MODE  NOTHING ELSE ENGAGED USING AN ASHLY X OVER DSP OFF
THANKS
DAVE
View Post

Hmmmm
Are you using the Banana Plugs or the SpeakOns?
If the SpeakOns which connector? CH1 or CH2?
If the a SpeakOn have you tried the banana plugs to see if they have output?

If the channel is just not working than you should send the amp in for us to look at. Go online to our web site and create an SRA (Service Return Authorization). After you have this SRA number call our Factory Service Dep't (1.800.342.6939 x8205) and they will take care of getting you a postage paid Return Shipping Label and a Box (if needed).

#5 DAVE HERGET

DAVE HERGET
  • Members
  • 3 posts

Posted 14 September 2006 - 11:55 AM

QUOTE(DGlass @ Sep 13 2006, 08:28 AM)
QUOTE(DAVE HERGET @ Sep 11 2006, 01:07 PM)
QUOTE(DGlass @ Sep 11 2006, 07:22 AM)
What mode is the amp in? Stereo Bridge-Mono?
Do you have anything else engaged in the amp? "Y"? XOV? EQ? Brig Subs?
View Post


THE AMP IS IN STEREO MODE  NOTHING ELSE ENGAGED USING AN ASHLY X OVER DSP OFF
THANKS
DAVE
View Post

Hmmmm
Are you using the Banana Plugs or the SpeakOns?
If the SpeakOns which connector? CH1 or CH2?
If the a SpeakOn have you tried the banana plugs to see if they have output?

If the channel is just not working than you should send the amp in for us to look at. Go online to our web site and create an SRA (Service Return Authorization). After you have this SRA number call our Factory Service Dep't (1.800.342.6939 x8205) and they will take care of getting you a postage paid Return Shipping Label and a Box (if needed).
View Post


I'M USING HARD WIRE TO SPEAKER OUTPUTS. THE BINDING POSTS ARE TIGHT
AFTER CHECKING THE THINGS YOU SAID I FIRED UP THE AMP DID NOT CHANGE ANYTHING HOOKED UP A SPEAKER AND EVERYTHING WORKED PROPERLY IS THERE ANYWAY THE DSP CAN EFFECT THE AMP WHEN THE DISPLAY SAYS DSP OFF